Difference between revisions of "IAstroHub"
From Blue-IT.org Wiki
(Created page with "== iAstroHub == [http://thx59.free.fr/crbst_6.html iAstroHub] is a client/server based astronomy software-suite for the raspberry pi 3 to control a telescope mount and other t...") |
|||
| (5 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | == iAstroHub == | + | == iAstroHub on Raspberry Pi 3 == |
[http://thx59.free.fr/crbst_6.html iAstroHub] is a client/server based astronomy software-suite for the raspberry pi 3 to control a telescope mount and other tools via indi. Also read the [https://www.cloudynights.com/topic/551998-iastrohub-30-iot-for-astrophotography main thread at cloudynights.com]. | [http://thx59.free.fr/crbst_6.html iAstroHub] is a client/server based astronomy software-suite for the raspberry pi 3 to control a telescope mount and other tools via indi. Also read the [https://www.cloudynights.com/topic/551998-iastrohub-30-iot-for-astrophotography main thread at cloudynights.com]. | ||
| − | == Copy to SD-Card == | + | |
| + | Currently I am using iAstroHub 3.0.7 EqMod version. Download on first link above - in france: "telécharger" means "download". | ||
| + | |||
| + | === Copy to SD-Card === | ||
# Download the image from the website above or from the link in the thread above and unpack the file. | # Download the image from the website above or from the link in the thread above and unpack the file. | ||
# Open a terminal !!! | # Open a terminal !!! | ||
| Line 17: | Line 20: | ||
# Now we will copy the image of iAstroHub onto the scdard. ''The given device will be overwritten completely!'' So be sure and ''check twice you entered the devicename'' correct! Consider also: this process takes time. | # Now we will copy the image of iAstroHub onto the scdard. ''The given device will be overwritten completely!'' So be sure and ''check twice you entered the devicename'' correct! Consider also: this process takes time. | ||
cd /path/to/unzipped/image | cd /path/to/unzipped/image | ||
| − | dd bs=1M if=iAH3_EQmod_XXXXXX.img of=/dev/sdx | + | dd bs=1M if=iAH3_EQmod_XXXXXX.img of=/dev/sdx # TAKES TIME !!! |
| + | |||
| + | === Problems detecting modem === | ||
| + | |||
| + | * https://www.cloudynights.com/topic/551998-iastrohub-30-iot-for-astrophotography/page-20#entry8437024 | ||
| + | |||
| + | Test : | ||
| + | sudo ln -s /dev/ttyACM0 /dev/ttyUSB0 | ||
| + | sudo ln -s /dev/ttyACM1 /dev/ttyUSB1 | ||
| + | sudo ln -s /dev/ttyACM2 /dev/ttyUSB2 | ||
| + | sudo ln -s /dev/ttyACM3 /dev/ttyUSB3 | ||
| + | sudo ln -s /dev/ttyACM4 /dev/ttyUSB4 | ||
| + | |||
| + | ls -la /dev/ttyU* | ||
| + | |||
| + | Make permanent: | ||
| + | vim /etc/rc.local | ||
| + | |||
| + | ln -s /dev/ttyACM0 /dev/ttyUSB0 | ||
| + | ln -s /dev/ttyACM1 /dev/ttyUSB1 | ||
| + | ln -s /dev/ttyACM2 /dev/ttyUSB2 | ||
| + | ln -s /dev/ttyACM3 /dev/ttyUSB3 | ||
| + | ln -s /dev/ttyACM4 /dev/ttyUSB4 | ||
| + | |||
| + | Another approach: | ||
| + | * https://www.cloudynights.com/topic/551998-iastrohub-30-iot-for-astrophotography/?view=getnewpost | ||
| + | |||
| + | vim 10-astroEQ.rules | ||
| + | ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="000a", ENV{ID_MM_DEVICE_IGNORE}="1" | ||
| + | |||
| + | sudo service udev restart | ||
| + | |||
| + | |||
That's it. Place the sdcard into the rspberry and boot. Enjoy. | That's it. Place the sdcard into the rspberry and boot. Enjoy. | ||
| + | |||
| + | [[Category: Astronomy]] | ||
| + | [[Category: Raspberry PI]] | ||
Latest revision as of 19:53, 24 February 2019
iAstroHub on Raspberry Pi 3
iAstroHub is a client/server based astronomy software-suite for the raspberry pi 3 to control a telescope mount and other tools via indi. Also read the main thread at cloudynights.com.
Currently I am using iAstroHub 3.0.7 EqMod version. Download on first link above - in france: "telécharger" means "download".
Copy to SD-Card
- Download the image from the website above or from the link in the thread above and unpack the file.
- Open a terminal !!!
- Insert an empty 16GB SD-card into your sd-card reader
- In the terminal enter
dmesg | grep sd > [177813.817311] sd 0:0:0:0: [sdx] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB) > [177813.818599] sd 0:0:0:0: [sdx] Write Protect is on > [177813.818602] sd 0:0:0:0: [sdx] Mode Sense: 03 00 80 00 > [177813.829475] sdx: sdx1
After this you know that /dev/sdx is your sd-card! In reality this will be something like sdb, sdc, sdd or sde depending how many other disk you system has. Our partition has also one partition named sdx1 which is normal because all sdcard come preconfigured with on big partition. But is of no interest because we will erase the complete content of the disk.
- Control everything with cfdisk (terminal program) or gparted (graphical program).
- Now we will copy the image of iAstroHub onto the scdard. The given device will be overwritten completely! So be sure and check twice you entered the devicename correct! Consider also: this process takes time.
cd /path/to/unzipped/image dd bs=1M if=iAH3_EQmod_XXXXXX.img of=/dev/sdx # TAKES TIME !!!
Problems detecting modem
- https://www.cloudynights.com/topic/551998-iastrohub-30-iot-for-astrophotography/page-20#entry8437024
Test :
sudo ln -s /dev/ttyACM0 /dev/ttyUSB0 sudo ln -s /dev/ttyACM1 /dev/ttyUSB1 sudo ln -s /dev/ttyACM2 /dev/ttyUSB2 sudo ln -s /dev/ttyACM3 /dev/ttyUSB3 sudo ln -s /dev/ttyACM4 /dev/ttyUSB4
ls -la /dev/ttyU*
Make permanent:
vim /etc/rc.local
ln -s /dev/ttyACM0 /dev/ttyUSB0 ln -s /dev/ttyACM1 /dev/ttyUSB1 ln -s /dev/ttyACM2 /dev/ttyUSB2 ln -s /dev/ttyACM3 /dev/ttyUSB3 ln -s /dev/ttyACM4 /dev/ttyUSB4
Another approach:
vim 10-astroEQ.rules
ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="000a", ENV{ID_MM_DEVICE_IGNORE}="1"
sudo service udev restart
That's it. Place the sdcard into the rspberry and boot. Enjoy.