Difference between revisions of "Sane"
From Blue-IT.org Wiki
| (5 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| + | == Ubuntuusers article (German) == | ||
| + | Contributions to: | ||
| + | * [http://wiki.ubuntuusers.de/Sane Sane] | ||
| + | |||
=== Scanserver with saned under Ubuntu 10.04 === | === Scanserver with saned under Ubuntu 10.04 === | ||
Unfortunately there seems to be a bug in the inetd service under Ubuntu 10.04. | Unfortunately there seems to be a bug in the inetd service under Ubuntu 10.04. | ||
| Line 8: | Line 12: | ||
sudo apt-get install openbsd-inetd | sudo apt-get install openbsd-inetd | ||
| − | == 2. Change the | + | == 2. Change the rights for saned == |
sudo addgroup scanner | sudo addgroup scanner | ||
sudo usermod -G scanner -a saned | sudo usermod -G scanner -a saned | ||
| Line 21: | Line 25: | ||
192.168.0.0/24 | 192.168.0.0/24 | ||
| − | On the client | + | On the client edit ''/etc/sane.d/net.conf'' and add the servers IP or hostname |
## saned hosts | ## saned hosts | ||
| − | + | scanserver_ip_or_hostname | |
== 5. Restart the service == | == 5. Restart the service == | ||
sudo openbsd-inetd restart | sudo openbsd-inetd restart | ||
| + | |||
| + | == Test == | ||
| + | cat /etc/services | grep 6566 | ||
| + | sane-port 6566/tcp sane saned # SANE network scanner daemon | ||
| + | |||
| + | cat /etc/inetd.conf | grep sane | ||
| + | sane-port stream tcp nowait root /usr/sbin/saned saned | ||
| + | |||
| + | cat /etc/group | grep sane | ||
| + | saned:x:118: | ||
| + | scanner:x:1001:saned | ||
| + | |||
| + | scanimage -L | ||
| + | device `net:localhost:epson2:/dev/sg0' is a Epson Perfection1200 flatbed scanner | ||
That's it. | That's it. | ||
Beside the point wether it is secure to run saned as "root", this works! | Beside the point wether it is secure to run saned as "root", this works! | ||
| + | |||
| + | [[Category:Scanning]] | ||
Latest revision as of 20:00, 8 January 2012
Contents
Ubuntuusers article (German)
Contributions to:
Scanserver with saned under Ubuntu 10.04
Unfortunately there seems to be a bug in the inetd service under Ubuntu 10.04.
Therefore the configuration of saned scanserver had changed.
1. Install openbsd-inetd
sudo apt-get purge inetutils-inetd sudo apt-get install openbsd-inetd
2. Change the rights for saned
sudo addgroup scanner sudo usermod -G scanner -a saned
3. Configure inetd
Edit /etc/inetd.conf and add the following
sane-port stream tcp nowait root /usr/sbin/saned saned
4. Configure saned
On the server edit /etc/sane.d/saned.conf according to your local network:
## Access list 192.168.0.0/24
On the client edit /etc/sane.d/net.conf and add the servers IP or hostname
## saned hosts scanserver_ip_or_hostname
5. Restart the service
sudo openbsd-inetd restart
Test
cat /etc/services | grep 6566
sane-port 6566/tcp sane saned # SANE network scanner daemon
cat /etc/inetd.conf | grep sane
sane-port stream tcp nowait root /usr/sbin/saned saned
cat /etc/group | grep sane
saned:x:118: scanner:x:1001:saned
scanimage -L
device `net:localhost:epson2:/dev/sg0' is a Epson Perfection1200 flatbed scanner
That's it.
Beside the point wether it is secure to run saned as "root", this works!