Difference between revisions of "Tablet Computer"
From Blue-IT.org Wiki
(→Pocketbook Surfpad 4 L) |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 4: | Line 4: | ||
=== Encryption === | === Encryption === | ||
I only could encrypt the device using this method: | I only could encrypt the device using this method: | ||
| + | |||
| + | * Backup your device and data !!! | ||
| + | |||
| + | |||
| + | The following [could be obsolete ... | ||
* boot into recovery modus | * boot into recovery modus | ||
| − | * wipe | + | * wipe cache |
* factory reset (and clear all user data) | * factory reset (and clear all user data) | ||
| − | * flash the device with FW 149 | + | * flash the device with FW 149** |
* reboot the device | * reboot the device | ||
* after login continue with language, no wlan ( you don't need it yes ). | * after login continue with language, no wlan ( you don't need it yes ). | ||
* Don't configure the device or install any apps (root, google, ...) | * Don't configure the device or install any apps (root, google, ...) | ||
| + | |||
| + | |||
| + | |||
* enter a password (or pin) | * enter a password (or pin) | ||
| − | * reboot | + | * Now reboot and login ! |
| − | * | + | * immediately after reboot encrypt the device |
| + | |||
| + | |||
| + | If you don't follow this procedure, you will BE FORCED TO RESET your device to factory reset! | ||
| + | In my case it was not enough to delete the cache or factory reset the device - I HAD TO reflash the device with an actual firmware. | ||
| + | |||
| + | |||
| + | ** You can download the firmware from the official pocketbook page | ||
== Boot into recovery == | == Boot into recovery == | ||
Latest revision as of 08:16, 6 February 2016
Contents
Pocketbook Surfpad 4 L
Encryption
I only could encrypt the device using this method:
- Backup your device and data !!!
The following [could be obsolete ...
- boot into recovery modus
- wipe cache
- factory reset (and clear all user data)
- flash the device with FW 149**
- reboot the device
- after login continue with language, no wlan ( you don't need it yes ).
- Don't configure the device or install any apps (root, google, ...)
- enter a password (or pin)
- Now reboot and login !
- immediately after reboot encrypt the device
If you don't follow this procedure, you will BE FORCED TO RESET your device to factory reset!
In my case it was not enough to delete the cache or factory reset the device - I HAD TO reflash the device with an actual firmware.
- You can download the firmware from the official pocketbook page
Boot into recovery
- Power + Volume down
- Rashr - Flash Tool
Modifications
Rom Update
- Firmware 149 for PocketBook SURFpad 4 L
Root
- Kingo Root