Difference between revisions of "WinPC-NC"

From Blue-IT.org Wiki

 
Line 9: Line 9:
 
## Solution
 
## Solution
 
"Multicam HPGL" post processor (version 43775) in Fusion 360 as Default
 
"Multicam HPGL" post processor (version 43775) in Fusion 360 as Default
[[File:Z25OzqCj4b.png]]
 
  
 
### Fusion
 
### Fusion
Line 17: Line 16:
 
* Z-Achses inverted
 
* Z-Achses inverted
 
* Coordinates left down (like in fusion!!!)
 
* Coordinates left down (like in fusion!!!)
 +
 +
[[File:GkSaD0wDMr.png]]
 +
 +
### If Coordinates are wrong
 +
[[File:Z25OzqCj4b.png]]
  
 
## Links
 
## Links

Latest revision as of 10:43, 31 December 2022

  1. Trouble with WinPC-NC post prozessor of Fusion 360
    1. Using: https://cam.autodesk.com/hsmposts?p=winpc-nc

Gets weird circles for machining which exist _not_ in Fusion AMtmji8DFm.png

    1. Using HPGL is OK:

5Aq3SfWgVI.png

    1. Solution

"Multicam HPGL" post processor (version 43775) in Fusion 360 as Default

      1. Fusion

OHLM8pQ86v.png

      1. WinPC-NC
  • Z-Achses inverted
  • Coordinates left down (like in fusion!!!)

GkSaD0wDMr.png

      1. If Coordinates are wrong

Z25OzqCj4b.png

    1. Links