Difference between revisions of "Thinkpad R31"
From Blue-IT.org Wiki
(→Ubuntu Gutsy) |
|||
| Line 1: | Line 1: | ||
| − | + | =lspci= | |
| − | |||
00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 04) | 00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 04) | ||
00:02.0 VGA compatible controller: Intel Corporation 82830 CGC [Chipset Graphics Controller] (rev 04) | 00:02.0 VGA compatible controller: Intel Corporation 82830 CGC [Chipset Graphics Controller] (rev 04) | ||
| Line 19: | Line 18: | ||
02:00.2 USB Controller: NEC Corporation USB 2.0 (rev 04) | 02:00.2 USB Controller: NEC Corporation USB 2.0 (rev 04) | ||
| + | =Ubuntu Gutsy= | ||
==/etc/network/interfaces== | ==/etc/network/interfaces== | ||
With support for tuntap, used by virtualbox. | With support for tuntap, used by virtualbox. | ||
Revision as of 15:59, 3 December 2007
lspci
00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 04) 00:02.0 VGA compatible controller: Intel Corporation 82830 CGC [Chipset Graphics Controller] (rev 04) 00:02.1 Display controller: Intel Corporation 82830 CGC [Chipset Graphics Controller] 00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB Controller #3 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42) 00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02) 00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02) 00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02) 01:08.0 Ethernet controller: Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42) 01:09.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 02) 02:00.0 USB Controller: NEC Corporation USB (rev 43) 02:00.1 USB Controller: NEC Corporation USB (rev 43) 02:00.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
Ubuntu Gutsy
/etc/network/interfaces
With support for tuntap, used by virtualbox.
# This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback auto eth0 iface eth0 inet manual # The primary network interface auto tap0 iface tap0 inet manual tunctl_user apos uml_proxy_arp ibmr31 uml_proxy_ether eth0 # - install more if necessary # - don't forget to add them to br0 # auto tap1 # iface tap1 inet manual # tunctl_user apos # uml_proxy_arp this_server # uml_proxy_ether eth0 # bridge auto br0 iface br0 inet dhcp address 192.168.0.11 netmask 255.255.255.0 gateway 192.168.0.254 bridge_ports eth0 tap0 bridge_maxwait 0
xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
Option "EmulateWheel" "true"
Option "EmulateWheelButton" "2"
EndSection
Section "Device"
Identifier "Intel Corporation 82830 CGC [Chipset Graphics Controller]"
Driver "i810"
#VideoRam 65536
#Option "DRI" "true"
#Option "noaccel" "true" # use when X won't start
BusID "PCI:0:2:0"
EndSection
Section "Monitor"
Identifier "Standardbildschirm"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation 82830 CGC [Chipset Graphics Controller]"
Monitor "Standardbildschirm"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768""1024x600" "800x600" "768x576" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection