LVM

HowTo - shrink and resize encrypted LUKS volumes

LVM and LUKS are often used together within a standard encrypted setup. The best HowTo I could find for Ubuntu which really sums up the essential tasks in a very good manner is on Ubuntu forums. Written in 2008 but the procedures are and will remain the same. The scenarios are to e.g. shrink an existing ubuntu installation to fit on another disk (move from bigger hdd to a smaller sdd) or vice versa.

• ubuntuforums.org thread (3/2008): How to Resize a LUKS Encrypted File System

Install necessary apps

E.g. on a rescue disc ...

apt-get install cryptsetup

Open encryted lvm partition

Be arefulat this step!

If this is the root device, you will need to USE EXACTLY THE SAME NAME FOR THE CRYPT (here: "sda5_crypt") like in your Ubuntu environment.

If not, you will not be able to boot your device, because the system will be configured using the wrong name for your mapper

#Please edit
my_crypt_name=sda5_crypt

cryptsetup luksOpen /dev/sda5 ${my_crpyt_name}

If you are unsure, uncrypt your device, mount it and have a look into the /etc/crypttab for the name like this:

cryptsetup luksOpen /dev/sda5 test_crypt
mount /dev/mapper/vg-somename-root /mnt/test

nano /mnt/test/etc/crypttab
> sda5_crypt UUID=def346a0-6e33-4523-b99c-d7777b980b34 none luks,discard

umount /mnt/test
crpytsetup luksClose test_crypt

Mount existing volume groups

sudo apt-get install lvm2
sudo modprobe dm-mod

sudo vgchange -a y
> 2 logical volume(s) in volume group "vg-whatever" now active

ls /dev/mapper
> control sda5_crypt vg--whatever--root  vg--whatever--swap

# Please edit
my_root=/mnt/whatever_root
my_vg=vg--whatever--root
my_boot_device=/dev/sda1

# Mount /root and /boot
mkdir ${my_root}
mount /dev/mapper/${my_vg} ${my_root}
mount ${my_boot_device} ${my_root}/boot

# Chroot
mount -o bind /dev ${my_root}/dev; \
mount -o bind /run ${my_root}/run; \
mount -t proc /proc ${my_root}/proc; \
mount -t sysfs /sys ${my_root}/sys
chroot ${my_root}

Umount existing volume groups and close encrypted container

sudo umount ${my_root}/*
sudo umount /dev/mapper/${my_vg}
sudo vgchange -a n
sudo cryptsetup luksClose ${my_crpyt}