IAstroHub

From Blue-IT.org Wiki

Revision as of 22:43, 10 February 2018 by Apos (talk | contribs) (iAstroHub)

iAstroHub on Raspberry Pi 3

iAstroHub is a client/server based astronomy software-suite for the raspberry pi 3 to control a telescope mount and other tools via indi. Also read the main thread at cloudynights.com.

Copy to SD-Card

  1. Download the image from the website above or from the link in the thread above and unpack the file.
  2. Open a terminal !!!
  3. Insert an empty 16GB SD-card into your sd-card reader
  4. In the terminal enter
dmesg | grep sd
> [177813.817311] sd 0:0:0:0: [sdx] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB)
> [177813.818599] sd 0:0:0:0: [sdx] Write Protect is on
> [177813.818602] sd 0:0:0:0: [sdx] Mode Sense: 03 00 80 00
> [177813.829475]  sdx: sdx1

After this you know that /dev/sdx is your sd-card! In reality this will be something like sdb, sdc, sdd or sde depending how many other disk you system has. Our partition has also one partition named sdx1 which is normal because all sdcard come preconfigured with on big partition. But is of no interest because we will erase the complete content of the disk.

  1. Control everything with cfdisk (terminal program) or gparted (graphical program).
  2. Now we will copy the image of iAstroHub onto the scdard. The given device will be overwritten completely! So be sure and check twice you entered the devicename correct! Consider also: this process takes time.
cd /path/to/unzipped/image
dd bs=1M if=iAH3_EQmod_XXXXXX.img of=/dev/sdx

That's it. Place the sdcard into the rspberry and boot. Enjoy.