Difference between revisions of "KVM"

From Blue-IT.org Wiki

(Bash script for open up a port)
m (Using VirtualBox and KVM together)
 
(60 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
== Preface ==
 
== Preface ==
As time of writign, I am using KVM on a Lenovo ThinkServer TS430. The Machine uses an raid 5 array for the storage of the virtual machines. The Hypervisor is an Zentyal / Ubuntu 12.04 LTS distribution. It runs separately on a single harddisk. [[Zentyal]] makes the administration of network, bridges and firewall tasks a lot more easier than a bare ubuntu system, but also adds some complexity to the system.
+
As time of writing, I am using KVM on a Lenovo ThinkServer TS 430. The Machine uses an raid 5 array for the storage of the virtual machines. The Hypervisor is an Zentyal / Ubuntu 14.04 LTS distribution. It runs separately on a single harddisk. [[Zentyal]] makes the administration of network, bridges and firewall tasks a lot more easier than a bare Ubuntu system, but also adds some complexity to the system.
  
Concerning creating a good network topology. For the beginner, the follwing articles are a good starting point:
+
Concerning creating a good network topology. For the beginner, the following articles are a good starting point:
 
* [http://www.tuxradar.com/content/howto-linux-and-windows-virtualization-kvm-and-qemu#null Tuxradar Howto]
 
* [http://www.tuxradar.com/content/howto-linux-and-windows-virtualization-kvm-and-qemu#null Tuxradar Howto]
 
* [http://sandilands.info/sgordon/linux-servers-as-kvm-virtual-machines A detailed example with nice network topology diagram and iptables to get the big picture]
 
* [http://sandilands.info/sgordon/linux-servers-as-kvm-virtual-machines A detailed example with nice network topology diagram and iptables to get the big picture]
 
* [http://pic.dhe.ibm.com/infocenter/lnxinfo/v3r0m0/index.jsp?topic=%2Fliaat%2Fliaatkvmsecguest.htm IBM Dokumentation using KVM]
 
* [http://pic.dhe.ibm.com/infocenter/lnxinfo/v3r0m0/index.jsp?topic=%2Fliaat%2Fliaatkvmsecguest.htm IBM Dokumentation using KVM]
 +
* [http://docs.openstack.org/image-guide/introduction.html Openstack - Virtualisation Platform]
  
 
== Using VirtualBox and KVM together ==
 
== Using VirtualBox and KVM together ==
Many Torials say using VirtualBox and KVM together at the same server at the same time is NOT possible!!!
+
Many Tutorials say using VirtualBox and KVM together at the same server at the same time is NOT possible!!!
 
* http://swaeku.github.io/blog/2013/04/04/run-kvm-and-virtualbox-together/
 
* http://swaeku.github.io/blog/2013/04/04/run-kvm-and-virtualbox-together/
  
 
One says, it is possible:
 
One says, it is possible:
 
* [http://www.dedoimedo.com/computers/kvm-virtualbox.html Using virtualbox and kvm]
 
* [http://www.dedoimedo.com/computers/kvm-virtualbox.html Using virtualbox and kvm]
 +
 +
Also see
 +
 +
* [https://help.ubuntu.com/community/KVM/FAQ Ubuntu community FAQ - KVM]
  
 
You don't have to uninstall either of them! But you have to choose the runtime:
 
You don't have to uninstall either of them! But you have to choose the runtime:
Line 44: Line 49:
 
Show iptables rules
 
Show iptables rules
 
  watch -n2 iptables -nvL -t nat
 
  watch -n2 iptables -nvL -t nat
 +
 +
Renaming the image of a virtual machine is not a trivial task. It is NOT ennough to edit the xml files in /etc/libvirt/quemu:
 +
 +
# [1] RENAME the image
 +
mv /vms/my.img /vms_new_name.img
 +
 +
dom="my-domain"
 +
virsh dumpxml $dom > ${dom}.xml
 +
 +
# [2] EDIT the image, so it matches your move from [1]
 +
vim ${dom}.xml
 +
 +
virsh undefine ${dom}
 +
virsh define ${dom}.xml
 +
 +
rm ${dom}.xml
 +
 +
== Convert an image ==
 +
 +
A good starting point is THE stack for managing systems with virtual appliences [http://docs.openstack.org Openstack], which have an overall very good documentation about virtualisation systems:
 +
 +
* http://docs.openstack.org/image-guide/convert-images.html
 +
* http://docs.openstack.org/image-guide/introduction.html
 +
 +
If you like to convert from e.g. vmdk (compressed) or vdi to qcow2, you have to go a two step way. You can use either ''qemu-img'' or  ''VBoxManager'' for conversion tasks.
 +
 +
I highly recommend for the conversion to use  ....
 +
 +
# '''two different drives''' for input and output image (HDD, SSD)
 +
# and use a '''highspeed connection''' between those (USB 3.0, SATA)
 +
 +
... because the files could get very big and the '''conversion speed almost depends on the speed of the used hardware.'''
 +
 +
=== From vdi to qcow2 ===
 +
If you have an vdi image, you can convert directly to qcow2:
 +
qemu-img convert -p -f vdi -O qcow2 'image.vdi' 'image.qcow2'
 +
 +
=== From vmdk via raw to qcow2 ===
 +
==== 1. From vmdk to raw ====
 +
This would be always the first step:
 +
 +
qemu-img convert -p -f vmdk -O raw original_image.vmdk raw_image.raw
 +
      (2.00/100%)
 +
 +
Tip: Using ''-p'' shows the progress "(2.00/100%)" in the converting process
 +
 +
==== 2. From raw image to qcow2 ====
 +
 +
Qcow(2) is the preferred format:
 +
 +
qemu-img convert -f vmdk -O qcow2 raw_image.raw original_image.qcow2
 +
    (2.00/100%)
 +
 +
== Copy an image ==
 +
Copying an image is an easy task. The only thing to remember is to alter the uuid, the mac-address and the name of the virtual machine. If you are going to copy the machine to another libvirt instance, you should be aware of using the same names for storage space and e.g. virtual networks!
 +
 +
# Changing the uuid
 +
# changing the mac-adress
 +
# changing the name of the machine (if in the same environment)
 +
 +
# Stop the machine
 +
virsh shutdown my.vm
 +
 +
# copy over the storage image
 +
cp {my.vm,my-copy.vm}.img
 +
 +
# do an xml dump of the vm definition
 +
virsh dumpxml my.vm > /tmp/my-new.xml
 +
 +
# libvirt assigns a new address!
 +
sed -i /uuid/d /tmp/my-new.xml
 +
sed -i '/mac address/d' /tmp/my-new.xml
 +
 +
# rename the vm
 +
sed -i s/name_of_old_vm/new_name /tmp/my-new.xml
 +
 +
# copy over all files to a new system
 +
# name of storage space and e.g. virtual networks must match!
 +
# and create the new vm
 +
virsh define /tmp/my-new.xml
 +
 +
== Mount qcow images with nbd ==
 +
Sometimes a qcow(2)-image does not start. There is an easy way to mount and recover such images with linux with the '''nbd kernel module (network block device)'''.
 +
 +
Lets assume, you like to check and repair an Windows 7 image, which normally has two ntfs partitions.
 +
 +
sudo su
 +
modprobe nbd max_part=8
 +
qemu-nbd --connect=/dev/nbd0 windows7.qcow2
 +
 +
Now we can handle the nbd device like a normal harddisk.
 +
 +
Then there will be the following output with e.g. cfdisk
 +
 +
cfdisk /dev/nbd0
 +
 +
Name    Flags  Part Typ    FS Type    [Label]            Size (MB)
 +
 
 +
                  Pri/Log    Free Space                      1,05
 +
nbd0p1  Boot    Primary    ntfs        [System-reservier]  104,86 
 +
nbd0p2          Primary    ntfs                            42842,72
 +
                  Pri/Log    Free Space         
 +
 +
You can mount the partitions ...
 +
 +
mount /dev/nbd0p1 MOUNTPOINT_P1
 +
mount /dev/nbd0p2 MOUNTPOINT_P2
 +
 +
... or check them with ntfsck or other tools.
 +
 +
ntfsck /dev/nbd0p1
 +
 +
After work, disconnect the device:
 +
 +
qemu-nbd --disconnect /dev/nbd0
 +
 +
== VirtIO==
 +
VirtIO drivers speed up network an disk speed a lot fpor windows systems. They are not part of the official windows system. The easiest way is to download them from PORXMOX (Version < 173)
 +
* https://pve.proxmox.com/wiki/Windows_VirtIO_Drivers
 +
Also read:
 +
* https://docs.fedoraproject.org/en-US/quick-docs/creating-windows-virtual-machines-using-virtio-drivers/index.html
 +
 +
Installation:
 +
You can - if you downloaded the iso version greater than 173 the installer inside of windows. Therefore please be aware, that you cannot start a windows system configured for usage with virtio without virtio drivers installed!!!
 +
 +
== Spice ==
 +
 +
This was tested with ubuntu 14.04 (emulator /usr/bin/kvm-spice).
 +
--[[User:Apos|Apos]] ([[User talk:Apos|talk]]) 20:58, 17 April 2014 (CEST)
 +
 +
Enable '''spice''' for the type of display and '''qxl''' protocol for the video  adapter.
 +
 +
Then be shure to have the following packages installed on client-side:
 +
 +
apt-get install python-spice-client-gtk spice-client-gtk virt-viewer virt-manager
  
 
== Migration from VirtualBox to KVM ==
 
== Migration from VirtualBox to KVM ==
Line 69: Line 209:
 
  cd /to/the/SnapShot/dir
 
  cd /to/the/SnapShot/dir
 
  VBoxManage clonehd -format RAW "SNAPSHOT_UUID" /home/vm-exports/myNewVM.raw
 
  VBoxManage clonehd -format RAW "SNAPSHOT_UUID" /home/vm-exports/myNewVM.raw
 +
 +
 +
When you start the virtual machine with plain kvm-qemu you will certainly get a BSOD. This can be circumvented starting the machine according to the following article:
 +
 +
* https://bbs.archlinux.org/viewtopic.php?id=194350
 +
 +
... with something like
 +
 +
qemu-system-x86_64
 +
...
 +
-machine q35,accel=kvm
 +
-drive if=none,file=your.image
 +
-device ahci,id=ahci
 +
-device ide-drive,bus=ahci.0,drive=d1
 +
 +
I by myself found out, using these settings in ''virt-manager'' works also very well. I also set
 +
 +
* audio to ''ac97'' and
 +
* network to the ''e1000'' driver
 +
 +
Then I start the machine in safe mode with networking and install the [https://www.google.de/search?client=ubuntu&channel=fs&q=windows+virtio+drivers+networking+iso&ie=utf-8 virtio drivers for networking from linux-kvm.org] and the [http://www.spice-space.org/download.html spice video guest drivers and qxl drivers from spice-space.org].
  
 
== Accessing a - via Zentyal configured - bridged machine ==
 
== Accessing a - via Zentyal configured - bridged machine ==
Line 99: Line 260:
  
 
== Accessing services on KVM guests behind a NAT ==
 
== Accessing services on KVM guests behind a NAT ==
 +
=== Preface ===
 +
Be careful. By doing this, you open up ports to the outside world. If you are using pfSense in front of your host or another firewall you can simply restrict this by using VPN.
 +
 +
Access from internet to guest:
 +
internet -> pfSense (WAN / host ip and port)
 +
          -> host port -> iptables -> nat bridge -> guest port
 +
 +
Access only via vpn to guest
 +
internet -> pfSense (OpenVPN / host ip and port)
 +
          -> host port -> iptables -> nat bridge -> guest port
 +
 +
[[File:Pfsense port forward kvm nat bridge.png|800px]]
 +
 +
=== The qemu hook ===
 
This is done by editing a hook-script for quemu:
 
This is done by editing a hook-script for quemu:
 
  /etc/libvirt/hooks/qemu
 
  /etc/libvirt/hooks/qemu
 +
 +
This script can be literally anything. A bash script, a python script, whatever
 +
 +
It looks like this
 +
vim /etc/libvirt/hooks/qemu
 +
 +
#!/bin/bash
 +
run_another_sript param1 param2
 +
 +
 +
Please look at [[KVM#qemu_hook_script]] section for an example using this to configure your own iptable rules for your machines.
  
 
I am referring to this article:
 
I am referring to this article:
 
* http://systemdilettante.blogspot.de/2013/06/accessing-services-on-kvm-guests-behind.html
 
* http://systemdilettante.blogspot.de/2013/06/accessing-services-on-kvm-guests-behind.html
  
which ist mentioned in the libvirt wiki:
+
which is mentioned in the libvirt wiki:
 
* http://wiki.libvirt.org/page/Networking#Guest_configuration
 
* http://wiki.libvirt.org/page/Networking#Guest_configuration
 
I installed the qemu-python script of the first article under ubuntu 12.04 LTS, which worked like expected.
 
 
So I can access a port in the virtualmachine-guest with the IP/Port of the host (!).
 
From within the host, it is possible to reach the guest via it's real ip.
 
I am using the virtio-Interface (performance).
 
  
 
=== Control NAT rules ===
 
=== Control NAT rules ===
Line 121: Line 301:
 
# libvirt nat-rules for the bridges are applied at service start time - this can interfere with other rules
 
# libvirt nat-rules for the bridges are applied at service start time - this can interfere with other rules
 
# This is done by a quemu-hook script, called '''/etc/libvirt
 
# This is done by a quemu-hook script, called '''/etc/libvirt
 +
 +
On [[Zentyal]], there are other pitfalls. Please [[Zentyal read this]].
  
 
=== An example ===
 
=== An example ===
Line 127: Line 309:
 
he POSTROUTING chains are set automatically by virt-manager and allow the virtual-machine accessing the internet from inside of the machine using NAT.
 
he POSTROUTING chains are set automatically by virt-manager and allow the virtual-machine accessing the internet from inside of the machine using NAT.
  
  iptables -nvL -t nat
+
  iptables -nvL -t nat [--line-number]
  
 
Then you should see something like the following.  
 
Then you should see something like the following.  
Line 151: Line 333:
 
     0    0 MASQUERADE  all  --  *      *      192.168.122.0/24    !192.168.122.0/24
 
     0    0 MASQUERADE  all  --  *      *      192.168.122.0/24    !192.168.122.0/24
  
=== Solution: qemu hook script ===
+
=== Qemu hook script ===
  
 
A script from [http://www.jimscode.ca/index.php/component/content/article/19-linux/142-linux-port-forwarding-to-guest-libvirt-vms here] is a little bit altered:
 
A script from [http://www.jimscode.ca/index.php/component/content/article/19-linux/142-linux-port-forwarding-to-guest-libvirt-vms here] is a little bit altered:
Line 179: Line 361:
 
  vim $script
 
  vim $script
  
--[[User:Apos|Apos]] ([[User talk:Apos|talk]]) 20:18, 31 October 2013 (CET)
+
The script runs another script which first removes all custom iptable-rules twice, then re-adds them to the system.
 +
 
 
  #!/bin/bash
 
  #!/bin/bash
 +
/usr/local/bin/set_iptables_all_guest remove
 +
sleep 1
 +
/usr/local/bin/set_iptables_all_guest remove
 +
sleep 1
 
   
 
   
  Guest_name="vm-webserver"
+
  /usr/local/bin/set_iptables_all_guest add
  Guest_ipaddr=192.168.122.2
+
 
  Host_ports=" 80 443 8080 "
+
=== Set iptables script for guests (used by qemu hook) ===
 +
 
 +
Use this following script for central administration of your iptable rule settings for each machine.
 +
 
 +
This is handy, because you can test everything manually like this:
 +
set_iptables_all_guests add
 +
set_iptables_all_guests remove
 +
 
 +
Let's go:
 +
vim /usr/local/bin/set_iptables_all_guests
 +
 
 +
#!/bin/bash
 +
 +
del_prerouting() {
 +
iptables -t nat -D PREROUTING -p tcp --dport ${1} -j DNAT --to ${2}:${3}
 +
}
 +
   
 +
del_forward() {
 +
    iptables -D FORWARD -d ${1}/32 -p tcp -m state --state NEW -m tcp --dport ${2} -j ACCEPT
 +
}
 +
 +
del_output() {
 +
    #- allows port forwarding from localhost but
 +
    #  only if you use the ip (e.g http://192.168.1.20:8888/)
 +
iptables -t nat -D OUTPUT -p tcp -o lo --dport ${1} -j DNAT --to ${2}:${1}
 +
}
 +
 +
add_prerouting() {
 +
iptables -t nat -A PREROUTING -p tcp --dport ${1} -j DNAT --to ${2}:${3}
 +
}
 +
   
 +
add_forward() {
 +
    iptables -I FORWARD -d ${1}/32 -p tcp -m state --state NEW -m tcp --dport ${2} -j ACCEPT
 +
}
 
   
 
   
  for Host_port in $Host_ports;
+
  add_output() {
do
+
    #- allows port forwarding from localhost but
  if [ $1 = $Guest_name ]
+
    # only if you use the ip (e.g http://192.168.1.20:8888/)
then
+
  iptables -t nat -I OUTPUT -p tcp -o lo --dport ${1} -j DNAT --to ${2}:${1}
if [[ $2 = "stopped" || $2 = "reconnect" ]]
+
}
  then
 
        iptables -t nat -D PREROUTING -p tcp --dport $Host_port -j DNAT \
 
                  --to $Guest_ipaddr:$Host_port
 
 
   
 
   
        iptables -D FORWARD -d $Guest_ipaddr/32 -p tcp -m state --state NEW,RELATED,ESTABLISHED \
 
                -m tcp --dport $Host_port -j ACCEPT
 
 
   
 
   
#- allows port forwarding from localhost but
+
###############################################
# only if you use the ip (e.g http://192.168.1.20:8888/)
+
# ONLY EDIT HERE
iptables -t nat -D OUTPUT -p tcp -o lo --dport $Host_port -j DNAT \
+
Guest_name=vm-email
--to $Guest_ipaddr:$Host_port
+
# the admin interface via vpn and ports 4444 and 4445
 +
###############################################
 
   
 
   
    fi
+
if [ "${1}" = "${Guest_name}" ]; then
if [[ $2 = "start" || $2 = "reconnect" ]]
 
then
 
        iptables -t nat -I PREROUTING -p tcp --dport $Host_port -j DNAT \
 
                --to $Guest_ipaddr:$Host_port
 
 
   
 
   
        iptables -I FORWARD -d $Guest_ipaddr/32 -p tcp -m state --state NEW,RELATED,ESTABLISHED \
+
###############################################
                  -m tcp --dport $Host_port -j ACCEPT
+
# ONLY EDIT HERE
 +
Guest_ipaddr=192.168.11.2
 +
Host_port=( '4444' '4445' '993' '587' '25' '465' '143' )
 +
Guest_port=( '80' '443' '993' '587' '25' '465' '143' )
 +
###############################################
 
   
 
   
#- allows port forwarding from localhost but
+
length=$(( ${#Host_port[@]} - 1 ))
#  only if you use the ip (e.g http://192.168.1.20:8888/)
 
iptables -t nat -I OUTPUT -p tcp -o lo --dport $Host_port -j DNAT \
 
--to $Guest_ipaddr:$Host_port
 
 
   
 
   
 +
if [ "${2}" = "stopped" -o "${2}" = "reconnect" ]; then
 +
    for i in $(seq 0 $length); do
 +
        del_prerouting ${Host_port[$i]}  ${Guest_ipaddr} ${Guest_port[$i]}
 +
            del_forward ${Guest_ipaddr} ${Guest_port[$i]}
 +
            #- allows port forwarding from localhost but
 +
#  only if you use the ip (e.g http://192.168.1.20:8888/)
 +
del_output ${Host_port[$i]} ${Guest_ipaddr}
 +
    done
 
  fi
 
  fi
fi
 
done
 
 
   
 
   
Guest_name="vm-email"
+
if [ "${2}" = "start" -o "${2}" = "reconnect" ]; then
  Guest_ipaddr=192.168.123.2
+
    for i in `seq 0 $length`; do
Host_ports=" 993 587 25 465 143 "
+
    add_prerouting ${Host_port[$i]} ${Guest_ipaddr} ${Guest_port[$i]}
 +
    add_forward ${Guest_ipaddr} ${Guest_port[$i]}
 +
            #- allows port forwarding from localhost but
 +
# only if you use the ip (e.g http://192.168.1.20:8888/)
 +
    add_output ${Host_port[$i]} ${Guest_ipaddr}
 +
    done
 +
fi
 
   
 
   
  for Host_port in $Host_ports;
+
  fi
do
 
if [ $1 = $Guest_name ]
 
then
 
if [[ $2 = "stopped" || $2 = "reconnect" ]]
 
then
 
        iptables -t nat -D PREROUTING -p tcp --dport $Host_port -j DNAT \
 
                  --to $Guest_ipaddr:$Host_port
 
 
   
 
   
        iptables -D FORWARD -d $Guest_ipaddr/32 -p tcp -m state --state NEW,RELATED,ESTABLISHED \
+
###############################################
                -m tcp --dport $Host_port -j ACCEPT
+
# ONLY EDIT HERE
 +
Guest_name=vm-webserver
 +
###############################################
 
   
 
   
#- allows port forwarding from localhost but
+
  if [ "${1}" = "${Guest_name}" ]; then
# only if you use the ip (e.g http://192.168.1.20:8888/)
 
iptables -t nat -D OUTPUT -p tcp -o lo --dport $Host_port -j DNAT \
 
--to $Guest_ipaddr:$Host_port
 
 
   
 
   
    fi
+
###############################################
  if [[ $2 = "start" || $2 = "reconnect" ]]
+
# ONLY EDIT HERE
  then
+
  Guest_ipaddr=192.168.33.2
        iptables -t nat -I PREROUTING -p tcp --dport $Host_port -j DNAT \
+
Host_port=( '80' '443' '8080' )
                --to $Guest_ipaddr:$Host_port
+
  Guest_port=( '80' '443' '8080' )
 +
###############################################
 
   
 
   
        iptables -I FORWARD -d $Guest_ipaddr/32 -p tcp -m state --state NEW,RELATED,ESTABLISHED \
+
length=$(( ${#Host_port[@]} - 1 ))
                  -m tcp --dport $Host_port -j ACCEPT
 
 
   
 
   
#- allows port forwarding from localhost but  
+
if [ "${2}" = "stopped" -o "${2}" = "reconnect" ]; then
#  only if you use the ip (e.g http://192.168.1.20:8888/)
+
    for i in $(seq 0 $length); do
iptables -t nat -I OUTPUT -p tcp -o lo --dport $Host_port -j DNAT \
+
        del_prerouting ${Host_port[$i]}  ${Guest_ipaddr} ${Guest_port[$i]}
  --to $Guest_ipaddr:$Host_port
+
            del_forward ${Guest_ipaddr} ${Guest_port[$i]}
 +
            #- allows port forwarding from localhost but  
 +
#  only if you use the ip (e.g http://192.168.1.20:8888/)
 +
del_output ${Host_port[$i]} ${Guest_ipaddr}
 +
  done
 +
fi
 
   
 
   
 +
if [ "${2}" = "start" -o "${2}" = "reconnect" ]; then
 +
    for i in `seq 0 $length`; do
 +
    add_prerouting ${Host_port[$i]} ${Guest_ipaddr} ${Guest_port[$i]}
 +
    add_forward ${Guest_ipaddr} ${Guest_port[$i]}
 +
            #- allows port forwarding from localhost but
 +
#  only if you use the ip (e.g http://192.168.1.20:8888/)
 +
    add_output ${Host_port[$i]} ${Guest_ipaddr}
 +
    done
 
  fi
 
  fi
 +
 
  fi
 
  fi
done
 
  
 
=== Troubleshooting Zentyal ===
 
=== Troubleshooting Zentyal ===
 
Everytime you will alter your network setting in e.g. zentyal and thereby resetting your nat rules, you will need to
 
Everytime you will alter your network setting in e.g. zentyal and thereby resetting your nat rules, you will need to
 
# shutdown or save the virtual machines
 
# shutdown or save the virtual machines
# restart zentyal
 
 
# restard libvirtd
 
# restard libvirtd
# start over the virtual machines
+
# import sysctl settings
 +
# reapply all iptables settings with an '''extra script'''
  
This is done here (tested massively):
+
'''Therfore use the script mentioned in the [[NAT]] section. There use the given bash script for setting ip-tables.'''
 +
 
 +
You can use hooks to do this:
 +
* http://doc.zentyal.org/en/appendix-c.html
 +
 
 +
touch /etc/zentyal/hooks/firewall.postservice
 +
sudo chmod +x firewall.postservice
 +
 
 +
#vim /etc/zentyal/hooks/firewall.postservice
 +
 +
/bin/bash /home/administrator/bin/kvm/set_iptables_all_guests remove
 +
sleep 1
 +
/bin/bash /home/administrator/bin/kvm/set_iptables_all_guests add
 +
 
 +
Then everytime your firewall is restarted (which is the case for network module too!), your [[NAT]] settings will be applied.
 +
sudo service zentyal firewall restart
 +
 
 +
 
 +
 
 +
=== Restarting libvirt manually ===
 +
Resting libvirt and setting all things right is done manually with the following script.
  
 
  #!/bin/bash  
 
  #!/bin/bash  
 
[ $UID==0 ] || echo "Only run as root"
 
[ $UID==0 ] || exit 1
 
 
myVMs="ac-g ac-f ac-w"
 
 
echo "#############################################################"
 
echo "## IPTABLES NAT"
 
iptables -nvL -t nat
 
 
echo "#############################################################"
 
echo "## Save virtual machines ..."
 
for vm in ${myVMs};
 
do
 
export LC_ALL="en_US.UTF-8";
 
virsh list | grep running | awk '{print $2}' | awk '{system("virsh save  " $0 " /data/virtual_machines_on_raid5/save/"$0)}'
 
done
 
 
    
 
    
  echo "#############################################################"
+
[ $UID==0 ] || echo "Only run as root"
  echo "## Restart Network"
+
[ $UID==0 ] || exit 1
  /etc/init.d/zentyal stop
+
 
 +
  echo "#############################################################"  
 +
  echo "## IPTABLES NAT"  
 +
iptables -nvL -t nat
 +
 
 +
  /etc/init.d/libvirt-bin restart
 +
sleep 15
 +
 
 +
/home/administrator/bin/kvm/set_iptables_all_guests remove
 +
/home/administrator/bin/kvm/set_iptables_all_guests remove
 +
/home/administrator/bin/kvm/set_iptables_all_guests add
 +
sleep 15
 +
 
 +
/sbin/sysctl -p /etc/sysctl.conf
 +
iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS  --clamp-mss-to-pmtu
 +
sleep 15  
 
    
 
    
sleep 5
+
  echo "#############################################################"  
/etc/init.d/zentyal start
+
  echo "## IPTABLES NAT"
 
sleep 15
 
/etc/init.d/libvirt-bin restart
 
 
echo "#############################################################"
 
echo "## Restore vms"
 
for vm in ${myVMs};
 
do
 
echo " ... restoring ${vm} ... please wait ..."
 
virsh restore /data/virtual_machines_on_raid5/save/${vm}
 
done
 
 
  echo "#############################################################"
 
  echo "## IPTABLES NAT"
 
 
  iptables -nvL -t nat
 
  iptables -nvL -t nat
  
 
=== NAT rules ===
 
=== NAT rules ===
Delete the first PREROUTING ruel
+
View the nat rules with line-numbers:
 +
iptables -nvL -t nat --line-number
 +
 
 +
Delete the PREROUTING rule with the line-number one:
 
  iptables -t nat -D PREROUTING 1
 
  iptables -t nat -D PREROUTING 1
 
given in this list
 
iptables -nvL -t nat
 
  
 
To reach the port inside the port 443 ('''<port_of_vm>''' ) inside of the virtual machine with a certain ip ('''<ip_vm>'''), do:
 
To reach the port inside the port 443 ('''<port_of_vm>''' ) inside of the virtual machine with a certain ip ('''<ip_vm>'''), do:
Line 325: Line 559:
 
This is the FIRST rule.
 
This is the FIRST rule.
  
==== Bash script for setting ip tables ====
+
Another example is to get port 80 traffic running out of a  bridged virtual machine with the bridge network 192.168.21.0/24:
To add a rule
+
iptables -t nat -I premodules -s 192.168.21.0/24 -p tcp -m tcp --dport 80 -j ACCEPT
  set_iptables add
+
iptables -t nat -D premodules -s 192.168.21.0/24 -p tcp --dport 80 -j ACCEPT
 +
 
 +
List all rules:
 +
  iptables-save
  
To remove it
+
Restore from a file or stdin:
  set_iptables remove
+
  iptables-restore
  
  > vim ~/bin/set_iptables
+
Restore filtered and commented rules:
 +
  comment="my special comment for this test rule"
 +
iptables -A ..... -m comment --comment "${comment}" -j REQUIRED_ACTION
 +
iptables-save | grep -v "${comment}" | iptables-restore
  
#!/bin/bash 
+
=== Bridge ===
 
+
Sometimes it is necessary to remove a bridge.
if [ ${1} = "" ] 
+
 
then 
+
Remove all network interfaces from the bridge:
        echo  "Usage with either 'add' or 'remove' ...  RETRY" 
+
brctl delif brX ethX
        exit 1 
+
 
fi 
+
Bring teh bridge down:
+
  ifconfig brX down
# the virtual  hosts adress
+
 
Guest_ipaddr=192.168.0.3
+
Remove the bridge:
Host_port=( '4444' '4445' )
+
  brctl delbr brX
Guest_port=( '80' '443' )
 
length=$(( ${#Host_port[@]} - 1 ))
 
 
 
if [ "${1}" = "remove" ]; then
 
    for i in $(seq 0 $length); do
 
            iptables -t nat -D PREROUTING -p tcp --dport ${Host_port[$i]} -j DNAT \
 
                    --to ${Guest_ipaddr}:${Guest_port[$i]}
 
            iptables -D FORWARD -d ${Guest_ipaddr}/32 -p tcp -m state --state NEW \
 
                    -m tcp --dport ${Guest_port[$i]} -j ACCEPT
 
    done
 
  fi
 
 
 
if [ "${1}" = "add" ]; then
 
    for i in `seq 0 $length`; do
 
            iptables -t nat -A PREROUTING -p tcp --dport ${Host_port[$i]} -j DNAT \
 
                    --to ${Guest_ipaddr}:${Guest_port[$i]}
 
            iptables -I FORWARD -d ${Guest_ipaddr}/32 -p tcp -m state --state NEW \
 
                    -m tcp --dport ${Guest_port[$i]} -j ACCEPT
 
    done
 
  fi
 
  
 
== Autostart at boot time ==
 
== Autostart at boot time ==
Line 388: Line 608:
 
* http://wiki.qemu.org/Features/Livebackup
 
* http://wiki.qemu.org/Features/Livebackup
  
[Category:Virtualisation]
+
[[Category:Virtualisation]]
 +
[[Category:Network]]
 +
[[Category:KVM]]
 +
[[Category:NAT]]
 +
[[Category:Zentyal]]

Latest revision as of 17:08, 24 June 2020

Preface

As time of writing, I am using KVM on a Lenovo ThinkServer TS 430. The Machine uses an raid 5 array for the storage of the virtual machines. The Hypervisor is an Zentyal / Ubuntu 14.04 LTS distribution. It runs separately on a single harddisk. Zentyal makes the administration of network, bridges and firewall tasks a lot more easier than a bare Ubuntu system, but also adds some complexity to the system.

Concerning creating a good network topology. For the beginner, the following articles are a good starting point:

Using VirtualBox and KVM together

Many Tutorials say using VirtualBox and KVM together at the same server at the same time is NOT possible!!!

One says, it is possible:

Also see

You don't have to uninstall either of them! But you have to choose the runtime:

Use VirtualBox

sudo service qemu-kvm stop
sudo service vboxdrv start

OR use KVM

sudo service vboxdrv stop
sudo service qemu-kvm start

Decide!

Command line foo

Prerequisites:

 sudo apt-get install ubuntu-vm-builder

Show running machines

virsh -c qemu:///system list

Save and restart a machine (hibernate)

#!/bin/bash
VM=$1
virsh save $VM /data/savedstate/$VM
virsh restore /data/savedstate/$VM

Show bridges

brctl show

Show iptables rules

watch -n2 iptables -nvL -t nat

Renaming the image of a virtual machine is not a trivial task. It is NOT ennough to edit the xml files in /etc/libvirt/quemu:

# [1] RENAME the image
mv /vms/my.img /vms_new_name.img

dom="my-domain"
virsh dumpxml $dom > ${dom}.xml

# [2] EDIT the image, so it matches your move from [1]
vim ${dom}.xml

virsh undefine ${dom}
virsh define ${dom}.xml

rm ${dom}.xml

Convert an image

A good starting point is THE stack for managing systems with virtual appliences Openstack, which have an overall very good documentation about virtualisation systems:

If you like to convert from e.g. vmdk (compressed) or vdi to qcow2, you have to go a two step way. You can use either qemu-img or VBoxManager for conversion tasks.

I highly recommend for the conversion to use ....

  1. two different drives for input and output image (HDD, SSD)
  2. and use a highspeed connection between those (USB 3.0, SATA)

... because the files could get very big and the conversion speed almost depends on the speed of the used hardware.

From vdi to qcow2

If you have an vdi image, you can convert directly to qcow2:

qemu-img convert -p -f vdi -O qcow2 'image.vdi' 'image.qcow2'

From vmdk via raw to qcow2

1. From vmdk to raw

This would be always the first step:

qemu-img convert -p -f vmdk -O raw original_image.vmdk raw_image.raw
     (2.00/100%)

Tip: Using -p shows the progress "(2.00/100%)" in the converting process

2. From raw image to qcow2

Qcow(2) is the preferred format:

qemu-img convert -f vmdk -O qcow2 raw_image.raw original_image.qcow2
    (2.00/100%)

Copy an image

Copying an image is an easy task. The only thing to remember is to alter the uuid, the mac-address and the name of the virtual machine. If you are going to copy the machine to another libvirt instance, you should be aware of using the same names for storage space and e.g. virtual networks!

  1. Changing the uuid
  2. changing the mac-adress
  3. changing the name of the machine (if in the same environment)
# Stop the machine
virsh shutdown my.vm
# copy over the storage image
cp {my.vm,my-copy.vm}.img

# do an xml dump of the vm definition
virsh dumpxml my.vm > /tmp/my-new.xml

# libvirt assigns a new address!
sed -i /uuid/d /tmp/my-new.xml
sed -i '/mac address/d' /tmp/my-new.xml

# rename the vm
sed -i s/name_of_old_vm/new_name /tmp/my-new.xml

# copy over all files to a new system 
# name of storage space and e.g. virtual networks must match!
# and create the new vm
virsh define /tmp/my-new.xml

Mount qcow images with nbd

Sometimes a qcow(2)-image does not start. There is an easy way to mount and recover such images with linux with the nbd kernel module (network block device).

Lets assume, you like to check and repair an Windows 7 image, which normally has two ntfs partitions.

sudo su
modprobe nbd max_part=8
qemu-nbd --connect=/dev/nbd0 windows7.qcow2

Now we can handle the nbd device like a normal harddisk.

Then there will be the following output with e.g. cfdisk

cfdisk /dev/nbd0

Name     Flags   Part Typ    FS Type     [Label]             Size (MB)
 
                 Pri/Log     Free Space                      1,05
nbd0p1   Boot    Primary     ntfs        [System-reservier]  104,86   
nbd0p2           Primary     ntfs                            42842,72
                 Pri/Log     Free Space          

You can mount the partitions ...

mount /dev/nbd0p1 MOUNTPOINT_P1
mount /dev/nbd0p2 MOUNTPOINT_P2

... or check them with ntfsck or other tools.

ntfsck /dev/nbd0p1

After work, disconnect the device:

qemu-nbd --disconnect /dev/nbd0

VirtIO

VirtIO drivers speed up network an disk speed a lot fpor windows systems. They are not part of the official windows system. The easiest way is to download them from PORXMOX (Version < 173)

Also read:

Installation: You can - if you downloaded the iso version greater than 173 the installer inside of windows. Therefore please be aware, that you cannot start a windows system configured for usage with virtio without virtio drivers installed!!!

Spice

This was tested with ubuntu 14.04 (emulator /usr/bin/kvm-spice). --Apos (talk) 20:58, 17 April 2014 (CEST)

Enable spice for the type of display and qxl protocol for the video adapter.

Then be shure to have the following packages installed on client-side:

apt-get install python-spice-client-gtk spice-client-gtk virt-viewer virt-manager

Migration from VirtualBox to KVM

This boils down to

  1. having a lot of time
  2. having a lot of free harddisk space
  3. creating a clone of the vbox-machine with VBoxManage clonehd (this can take a looooong time!). Kloning is the easiest way of getting rid of snapshots of an existing virtual machine.
  4. converting the images from vdi to qcow-format with qemu-img convert
  5. creating and configuring a new kvm-guest
  6. adding some fou to NAT with a qemu-hook (see next section)

To clone an image - on the same machine - you have to STOP kvm and start vboxdr (see above). Also be aware, that the raw-images take up a lot of space!

# The conversion can take some time. Other virtual machines are not accessible in this time
VBoxManage clonehd -format RAW myOldVM.vdi /home/vm-exports/myNewVM.raw
0%...
cd /home/vm-exports/
qemu-img convert -f raw myNewVM.raw -O qcow2 myNewVM.qcow

Cloning a Snapshot:

# for a snapshot do (not tested)
cd /to/the/SnapShot/dir
VBoxManage clonehd -format RAW "SNAPSHOT_UUID" /home/vm-exports/myNewVM.raw


When you start the virtual machine with plain kvm-qemu you will certainly get a BSOD. This can be circumvented starting the machine according to the following article:

... with something like

qemu-system-x86_64
...
-machine q35,accel=kvm
-drive if=none,file=your.image
-device ahci,id=ahci
-device ide-drive,bus=ahci.0,drive=d1

I by myself found out, using these settings in virt-manager works also very well. I also set

  • audio to ac97 and
  • network to the e1000 driver

Then I start the machine in safe mode with networking and install the virtio drivers for networking from linux-kvm.org and the spice video guest drivers and qxl drivers from spice-space.org.

Accessing a - via Zentyal configured - bridged machine

On ubuntu 12.04 there is a Ubuntu bug #50093 (mentioned here) which prevents accessing a machine inside the bridges network:

> vim /etc/sysctl.conf
net.bridge.bridge-nf-call-ip6tables = 0
net.bridge.bridge-nf-call-iptables = 0
net.bridge.bridge-nf-call-arptables = 0

Acitvate

sysctl -p /etc/sysctl.conf  

Make permanent

> vim /etc/rc.local
*** Sample rc.local file ***
/sbin/sysctl -p /etc/sysctl.conf
iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS  --clamp-mss-to-pmtu
exit 0

Verify

tail /proc/sys/net/bridge/*
iptables -L  FORWARD

> brctl show
bridge name     bridge id               STP enabled     interfaces 
br1             8000.50e5492d616d       no              eth1 
                                                        vnet1
[...]

Accessing services on KVM guests behind a NAT

Preface

Be careful. By doing this, you open up ports to the outside world. If you are using pfSense in front of your host or another firewall you can simply restrict this by using VPN.

Access from internet to guest:

internet -> pfSense (WAN / host ip and port) 
         -> host port -> iptables -> nat bridge -> guest port

Access only via vpn to guest

internet -> pfSense (OpenVPN / host ip and port) 
         -> host port -> iptables -> nat bridge -> guest port

Pfsense port forward kvm nat bridge.png

The qemu hook

This is done by editing a hook-script for quemu:

/etc/libvirt/hooks/qemu

This script can be literally anything. A bash script, a python script, whatever

It looks like this

vim /etc/libvirt/hooks/qemu
#!/bin/bash
run_another_sript param1 param2


Please look at KVM#qemu_hook_script section for an example using this to configure your own iptable rules for your machines.

I am referring to this article:

which is mentioned in the libvirt wiki:

Control NAT rules

IpTables is what you want. But there are some pitfalls:

  1. the prerouting rules, that enable a port forwarding into the nat'ed machine must be applied before (!) the virtual machine starts
  2. if you have a service installed like zentyal, or you are restarting your firewall, all rules are set back
  3. libvirt nat-rules for the bridges are applied at service start time - this can interfere with other rules
  4. This is done by a quemu-hook script, called /etc/libvirt

On Zentyal, there are other pitfalls. Please Zentyal read this.

An example

The PREROUTING rules vor vm-1 open up the ports 25, 587, 993 and 8080 for the NAT'ed virtual machine with the IP 192.168.122.2. So they are accessible from the outside world (webserver, e-mail-server, ...). This also means, that they can not be used any more in the host sytem (you should set the admin interface of e.g. zentyal to a different port).

he POSTROUTING chains are set automatically by virt-manager and allow the virtual-machine accessing the internet from inside of the machine using NAT.

iptables -nvL -t nat [--line-number]

Then you should see something like the following.


root@myHost:# iptables -nvL -t nat
Chain PREROUTING (policy ACCEPT 216 packets, 14658 bytes)
 pkts bytes target     prot opt in     out     source               destination         
   6   312 DNAT       tcp  --  *      *       0.0.0.0/0            0.0.0.0/0            tcp dpt:1222 to:192.168.122.2:80
   2   120 DNAT       tcp  --  *      *       0.0.0.0/0            0.0.0.0/0            tcp dpt:1223 to:192.168.122.2:443
   0     0 DNAT       tcp  --  *      *       0.0.0.0/0            0.0.0.0/0            tcp dpt:1444 to:192.168.122.2:8080
  
Chain INPUT (policy ACCEPT 14 packets, 2628 bytes)
 pkts bytes target     prot opt in     out     source               destination         
 
Chain OUTPUT (policy ACCEPT 12 packets, 818 bytes)
 pkts bytes target     prot opt in     out     source               destination         
 
Chain POSTROUTING (policy ACCEPT 17 packets, 1048 bytes)
 pkts bytes target     prot opt in     out     source               destination         
   0     0 MASQUERADE  tcp  --  *      *       192.168.122.0/24    !192.168.122.0/24     masq ports: 1024-65535
   6   406 MASQUERADE  udp  --  *      *       192.168.122.0/24    !192.168.122.0/24     masq ports: 1024-65535
   0     0 MASQUERADE  all  --  *      *       192.168.122.0/24    !192.168.122.0/24

Qemu hook script

A script from here is a little bit altered:

  • Guest port same as host port
  • ability to apply more than one port
  • ability to serve more than one guest
  • you can not distinguish between inside and outside port - not yet ;)
  • ... will be updated!

Prerequisites: On a (kvm)-host with the IP 192.168.0.10, a natted virtual kvm network bridge with the network 192.168.122.0/24 was created with e.g. virt-manager.

If your virtual server has the ip 192.168.122.2/24 - in our example here the vm-webserver - this machine must be applied with virt-manager to the natted-bridge 192.168.122.0/24.

Inside of the machine you have to apply the gateway 192.168.122.1 of the bridge. Then, and only then you can reach this machine (and ports) with the following script using your hosts (!!!) ip 192.168.0.10.

The port 443 of your webserver on 192.168.122.2 can be reached from outside with 192.168.0.10:443.

If there is a firewall in front of the kvm-host-machine, you will forward the ports to exacly this address ( 192.168.0.10:443) to reach your https-website inside the vm-webserver with the ip 192.168.122.2.

Everything is handeled by the gateway of the bridge 192.168.122.1 and the nat rules you apply at start time.

Capiche?

> script="/etc/libvirt/hooks/qemu"; \
touch $script; \
chmod +x $script; \
vim $script

The script runs another script which first removes all custom iptable-rules twice, then re-adds them to the system.

#!/bin/bash
/usr/local/bin/set_iptables_all_guest remove
sleep 1
/usr/local/bin/set_iptables_all_guest remove
sleep 1

/usr/local/bin/set_iptables_all_guest add

Set iptables script for guests (used by qemu hook)

Use this following script for central administration of your iptable rule settings for each machine.

This is handy, because you can test everything manually like this:

set_iptables_all_guests add
set_iptables_all_guests remove

Let's go:

vim /usr/local/bin/set_iptables_all_guests
#!/bin/bash

del_prerouting() {
	iptables -t nat -D PREROUTING -p tcp --dport ${1} -j DNAT --to ${2}:${3}
}

del_forward() {
    iptables -D FORWARD -d ${1}/32 -p tcp -m state --state NEW -m tcp --dport ${2} -j ACCEPT
}

del_output() {
    #- allows port forwarding from localhost but 
    #  only if you use the ip (e.g http://192.168.1.20:8888/)
	iptables -t nat -D OUTPUT -p tcp -o lo --dport ${1} -j DNAT --to ${2}:${1}
}

add_prerouting() {
	iptables -t nat -A PREROUTING -p tcp --dport ${1} -j DNAT --to ${2}:${3}
}

add_forward() {
    iptables -I FORWARD -d ${1}/32 -p tcp -m state --state NEW -m tcp --dport ${2} -j ACCEPT
}

add_output() {
    #- allows port forwarding from localhost but 
    #  only if you use the ip (e.g http://192.168.1.20:8888/)
	iptables -t nat -I OUTPUT -p tcp -o lo --dport ${1} -j DNAT --to ${2}:${1}
}


###############################################
# ONLY EDIT HERE
Guest_name=vm-email
# the admin interface via vpn and ports 4444 and 4445
###############################################

if [ "${1}" = "${Guest_name}" ]; then

	###############################################
	# ONLY EDIT HERE
	Guest_ipaddr=192.168.11.2
	Host_port=( '4444' '4445' '993' '587' '25' '465' '143' )
	Guest_port=( '80' '443' '993' '587' '25' '465' '143' )
	###############################################

	length=$(( ${#Host_port[@]} - 1 ))

	if [ "${2}" = "stopped" -o "${2}" = "reconnect" ]; then
	    for i in $(seq 0 $length); do
	    	    del_prerouting ${Host_port[$i]}  ${Guest_ipaddr} ${Guest_port[$i]}
	            del_forward ${Guest_ipaddr} ${Guest_port[$i]}
	            #- allows port forwarding from localhost but 
				#  only if you use the ip (e.g http://192.168.1.20:8888/)
				del_output ${Host_port[$i]} ${Guest_ipaddr}
	    done
	fi

	if [ "${2}" = "start" -o "${2}" = "reconnect" ]; then
	    for i in `seq 0 $length`; do
	    		add_prerouting ${Host_port[$i]} ${Guest_ipaddr} ${Guest_port[$i]}
	    		add_forward ${Guest_ipaddr} ${Guest_port[$i]}
	            #- allows port forwarding from localhost but 
				#  only if you use the ip (e.g http://192.168.1.20:8888/)
	    		add_output ${Host_port[$i]} ${Guest_ipaddr}
	    done
	fi

fi

###############################################
# ONLY EDIT HERE
Guest_name=vm-webserver
############################################### 

if [ "${1}" = "${Guest_name}" ]; then

	###############################################
	# ONLY EDIT HERE
	Guest_ipaddr=192.168.33.2
	Host_port=( '80' '443' '8080' )
	Guest_port=( '80' '443' '8080' )
	############################################### 

	length=$(( ${#Host_port[@]} - 1 ))

	if [ "${2}" = "stopped" -o "${2}" = "reconnect" ]; then
	    for i in $(seq 0 $length); do
	    	    del_prerouting ${Host_port[$i]}  ${Guest_ipaddr} ${Guest_port[$i]}
	            del_forward ${Guest_ipaddr} ${Guest_port[$i]}
	            #- allows port forwarding from localhost but 
				#  only if you use the ip (e.g http://192.168.1.20:8888/)
				del_output ${Host_port[$i]} ${Guest_ipaddr}
		done
	fi

	if [ "${2}" = "start" -o "${2}" = "reconnect" ]; then
	    for i in `seq 0 $length`; do
	    		add_prerouting ${Host_port[$i]} ${Guest_ipaddr} ${Guest_port[$i]}
	    		add_forward ${Guest_ipaddr} ${Guest_port[$i]}
	            #- allows port forwarding from localhost but 
				#  only if you use the ip (e.g http://192.168.1.20:8888/)
	    		add_output ${Host_port[$i]} ${Guest_ipaddr}
	    done
	fi

fi

Troubleshooting Zentyal

Everytime you will alter your network setting in e.g. zentyal and thereby resetting your nat rules, you will need to

  1. shutdown or save the virtual machines
  2. restard libvirtd
  3. import sysctl settings
  4. reapply all iptables settings with an extra script

Therfore use the script mentioned in the NAT section. There use the given bash script for setting ip-tables.

You can use hooks to do this:

touch /etc/zentyal/hooks/firewall.postservice
sudo chmod +x firewall.postservice
#vim /etc/zentyal/hooks/firewall.postservice

/bin/bash /home/administrator/bin/kvm/set_iptables_all_guests remove
sleep 1
/bin/bash /home/administrator/bin/kvm/set_iptables_all_guests add

Then everytime your firewall is restarted (which is the case for network module too!), your NAT settings will be applied.

sudo service zentyal firewall restart


Restarting libvirt manually

Resting libvirt and setting all things right is done manually with the following script.

#!/bin/bash 
 
[ $UID==0 ] || echo "Only run as root" 
[ $UID==0 ] || exit 1 
 
echo "#############################################################" 
echo "## IPTABLES NAT" 
iptables -nvL -t nat 
 
/etc/init.d/libvirt-bin restart 
sleep 15 
 
/home/administrator/bin/kvm/set_iptables_all_guests remove 
/home/administrator/bin/kvm/set_iptables_all_guests remove 
/home/administrator/bin/kvm/set_iptables_all_guests add 
sleep 15 
 
/sbin/sysctl -p /etc/sysctl.conf 
iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS  --clamp-mss-to-pmtu 
sleep 15  
 
echo "#############################################################" 
echo "## IPTABLES NAT"  
iptables -nvL -t nat

NAT rules

View the nat rules with line-numbers: iptables -nvL -t nat --line-number

Delete the PREROUTING rule with the line-number one:

iptables -t nat -D PREROUTING 1

To reach the port inside the port 443 (<port_of_vm> ) inside of the virtual machine with a certain ip (<ip_vm>), do:

iptables -t nat -I PREROUTING -d 0.0.0.0/0 -p tcp --dport <port_of_vm> -j DNAT --to-destination <ip_vm>

Where "1" is the first PREROUTING rule that appears with the above command.

In the above example the first line is the PREROUTING chain with the number "6" and the port 80. This is the FIRST rule.

Another example is to get port 80 traffic running out of a bridged virtual machine with the bridge network 192.168.21.0/24:

iptables -t nat -I premodules -s 192.168.21.0/24 -p tcp -m tcp --dport 80 -j ACCEPT
iptables -t nat -D premodules -s 192.168.21.0/24 -p tcp --dport 80 -j ACCEPT 

List all rules:

iptables-save 

Restore from a file or stdin:

iptables-restore

Restore filtered and commented rules:

comment="my special comment for this test rule"
iptables -A ..... -m comment --comment "${comment}" -j REQUIRED_ACTION
iptables-save | grep -v "${comment}" | iptables-restore

Bridge

Sometimes it is necessary to remove a bridge.

Remove all network interfaces from the bridge:

brctl delif brX ethX

Bring teh bridge down:

ifconfig brX down

Remove the bridge:

brctl delbr brX

Autostart at boot time

Set the 'autostart' flag so the domain is started upon boot time:

virsh autostart myMachine

Shutdown

On Ubuntu 12.04 LTS (Precise Pangolin) the shutdown scripts already take care of stopping the virtual machines (at least in the newest version of the libvirt-bin package). However, by default the script will only wait 30 seconds for the VMs to shutdown. Depending on the services running in the VM, this can be too short.

In this case, you have to create a file /etc/init/libvirt-bin.override with the following content:

> vim /etc/init/libvirt-bin.override
# extend wait time for vms to shut down to 4 minutes
env libvirtd_shutdown_timeout=240

Backup KVM

Via LVM

LiveBackup (under development - --Apos (talk) 18:07, 30 October 2013 (CET))