1 History
2 Prerequisites
3 Prepare your workstation / server
4 The mount / umount script
5 On server: Using udev to mount/umount drives
- 5.1 Udev Rule for an external USB drive
  - 5.1.1 Problems with ACTION remove
- 5.2 Write the mount / umount script
6 Test everything
7 Discussion
8 Troubleshooting

History

A zipfile of the script can be downloaded: Media:Nfs_mount.zip.
--Apos 00:55, 27 August 2007 (CEST) All parts working. Verified on my working pc (ubuntu feisty), server (ubuntu feisty) and laptop (ubuntu feisty)

Prerequisites

Administrative privileges to the system
Profound knowledge of
- user administration,
- bash editing,
- nfs admnistration

The working directory for scripts is

/root/bin

Everything was implemented and tested on ubuntu systems, a network with three pc's.
In principle scalable to any system. Each nfs client is first pinged and then handles mount/umount commands itself via ssh.
Requires a new unpriviledged user on each client. This user is in the sudoers list, allowed to do the mount and unmount command.
passwordless ssh connections between the machines is required for this user.
This solution requires that both, nfs client and server are permanently connected through the network.

Motivation: add or removing shares

The intention for this HowTo was the problem, that in case you are removing an exported - and mounted - nfs file system from a network this will have severe side effects on the clients:

All applications depending on the file system will fail / hang
The desktop manager which will be left in an unusable state for minutes
Drives will not be synced, data loss can occur

Solution: Publisher/Subscriber Pattern

If a nfs exported filesystem is removed from the nfs server, it must also be removed on all computers that are connected to the nfs server.

The server therefore has to have a list of these computers. In speach of the publisher/subscriber pattern he is the publisher.

The nfs clients are the subscribers. They subscribe to the server. The administrator is doing this in our approach by writing them into the servers clientlist.

To provide mechanisms to add or remove files on the clients, the server must be able to connect somehow to the clients - and that's the problem of most of the current nfs servers implementations: Mostly, just the clients connect in certain time intervals to the nfs servers in the network and then wait fore a certain amount of time for the drive to reappears.

The publisher/subscriber pattern however wants the subscribers (clients) to be reported immediately, when the system state changed, e.g. a drive is unmounted.

And remember the following: any PC can be publisher and/or subscriber. So a mixed setup with more than one nfs server is no problem. Each server cares for it's own clients, no matter what other servers do.

On my home's setup, my server PC exports shares covering a backup drive via USB and a home directory. The second one is a laptop and exports his desktop. The third one is the working horse and exports music and video data. Each PC cares for the others, no matter which on will boot or shutdown - he takes care for unmounting his exported shared on its addicted clients.

Prepare your workstation / server

First open an editor

Login as root open the following files with your favorite editor.

gedit /etc/fstab \
      /etc/exports \
      /root/bin/nfs_clientlist.sh \
      /root/bin/mount_nfs_exports_on_attached_clients \
      /root/bin/mount_nfs_on_client \
      /root/bin/nfs_udev_mount.sh

These are the files we will alter/write. The last two have to be made executable via chmod 755.

/etc/exports

The /etc/exports delivers every information we need.

nfs share's mountpoints
possibly connected clients

Shares

It is easy to extract all exported shares of the nfs server with a little bash and awk charm and store it in a bash variable called EXPORTS

EXPORTS=`cat /etc/exports | grep -v ^# | grep " " \
| cut -f 1 | awk '{system("echo -n " $1 "----")}' \
| sed s/----/"  "/g`

It filters out all commentary lines, all empty lines, and writes the extracted directory names - devided by spaces - into the string $EXPORTS.

On server: Create a clientlist

It could be possible, to extract these information for each share of this file with a little bash magic. Feel free to do this. It also might be possible to write all this in perl ;)

Drop me a mail, if you have an idea..

In this solution I hold the variables of the nfs clients in a configuration file, called nfs_clientlist.sh. You can use the $HOSTNAME line, if you just have one network card and correctly configured your /etc/hosts:

cd /root/bin
vim nfs_clientlist.sh

############################################################
### PLEASE EDIT ############################################
############################################################

# All CLIENTLIST that use the nfs server on this machine
CLIENTLIST="client1 client2 client3"

# The hostname of this machine.
# Might be different with more than on network card.
#THISHOST=$HOSTNAME
THISHOST=myServerName

############################################################

Trigger the remote mount/unmount of shares

For the nfs servers machine to be able to trigger the mount/unmount on connected clients there might be two way's:

Writing a client/server program that communicates on a special port.
Issuing a bash mount/umount via ssh on the remote machine

The first approach might be possible in e.g. perl/pyhton, but for my purposes connection/reconnecting via ssh fits my needs.

Prepare the clients in the network

To be able to trigger the mount/unmount on each client we need a user has the following abilities:

sudo for mount/umount
passwordless login via ssh from server

On client: Create an unpriviledged user with ssh

Log in as root and create an unpriviledged user with a unique user id (in my case 130) and give it the password udevmount. Because we enable passwordless login via ssh a secure password makes no sin. Afterwards we create the ssh keys. Please press just ENTER until the key generation is finished. We don not use a password!

useradd -g 0 -m -u 130 -s /bin/bash udevmount
passwd udevmount
su udevmount -c /bin/bash
ssh-keygen -t dsa

As root, add the user to the sudoers file:

visudo

Add the two lines

udevmount ALL=(ALL) NOPASSWD: /bin/mount
udevmount ALL=(ALL) NOPASSWD: /bin/umount

For now we need a password. Later we will remove it.

Prepare the server

On server: Export the ssh keys to each client

On each nfs server you have to attach the generated public key to the authorized_keys2 file of the client you want to connect to.

Switch on all nfs client pc's.

Login as user udevmount:

su udevmount -c /bin/bash

Use a little helper script to create and distribute the ssh keys. Don't forget to edit your nfs_clientlist.sh in advance. The script uses this file to connect to all clients.

cd /root/bin
vim nfs_clientlist.sh
vim ssh_helper.sh

#!/bin/sh
#
# /root/bin/ssh_helper.sh

. /root/bin/nfs_clientlist.sh

for client in $CLIENTLIST
do
 ssh $client "mkdir -p ~/.ssh; chmod 700 ~/.ssh"
 scp id_dsa.pub $client:~/.ssh/id_dsa.pub_${HOSTNAME}
 ssh $client "cat ~/.ssh/id_dsa.pub_${HOSTNAME} \
   >> ~/.ssh/authorized_keys2; \
   rm ~/.ssh/id_dsa.pub_${HOSTNAME}"
 chmod 600 id_dsa.pub
done

Execute the script:

sh ssh_helper.sh

Test

If you now try to connect to your client via ssh you should not be prompted for a password.

Back on prepared clients

On client: Remove the password of user udevmount

Since we have passwordless ssh connection from the server to each client, we don't need and don't want a login for the user udevmount on a local client.

So on every client do (as root)

sudo passwd -d udevmount

This assures, that only servers, that are authenticated via the ssh-keychain can contact the client.

If you need to recover the ssh authentication you have to add a pasword (sudo passwd udevmount again and proceed as before.

The mount / umount script

Naming conventions for mountpoints

On the clients the /etc/fstab should look like this

# on client
vim /etc/fstab

[...]
nfs_server:/media/MySpecialHarddisk  /media/MySpecialHarddisk  nfs  defaults  0 0

On the server the /etc/fstab should mount the device the same way accordingly:

# on nfs server
vim /etc/fstab

/dev/disk/MySpecialHarddisk  /media/MySpecialHarddisk  ext3 \
                rw,noauto,sync,noexec,users  0 0

In the next section you'll find a script, that helps you easily configuring your system.

Create the fstab, exports, udev entries

You can use the following script, but you should first read the whole article. Then you will be able to understand, what this script provides you with - and why.

The naming convention for equal names in fstab, exports and udev could lead to less flexible mountpoint names. Dealing with symlinks could fix the problem.

On the other side this could lead to a network wide unification, which isn't such bad thing.

The next script will help integrate a new drive in your network. Run it in a terminal, it gives you templates to copy and paste into the appropriate configuration files.

It will change NO files.

cd /root/bin
vim add_nfs_device.sh

#!/bin/bash
#
# add_nfs_device.sh
#
# Add a new udev device on the nfs server
# that matches the naming conventions

#################################################
#### EDIT TO FIT YOUR NEEDS #####################
#################################################

# Used for devicename, symlink, mountpoint, export
NAME_OF_DEVICE="Tevion_1_240MB"

# Udev params
UDEV_SUBSYSTEMS="usb"
UDEV_KERNEL="sd?a"
ATTRS_SERIAL="200501CAF55"
ENV_PRODUCT="67b/3507/1"
FILE_UDEV=/etc/udev/rules.d/10-local.rules

# local fstab
FILE_FSTAB=/etc/fstab
FSTAB_MOUNT_DIR=/media
FSTAB_FILESYSTEM="ext3"
FSTAB_MOUNT_OPTS="rw,noauto,sync,dirsync,noexec,nodev,noatime,users"
FSTAB_BOOT_OPTS="0 0"

# nfs exports
FILE_EXPORTS=/etc/exports
NFS_OPTIONS="rw,sync,no_root_squash,no_subtree_check"
CLIENTLIST="ibmr31" # Overwritten, when /root/bin/nfs_clientlist.sh exists


#################################################
#### Lets go ####################################
#################################################
echo "#-----------------------------------------"
echo "# Writing the udev rule"
echo "#-----------------------------------------"
cat - <<EOF
# added by `pwd`/$0
# External ${UDEV_SUBSYSTEMS} device - ${NAME_OF_DEVICE}
ACTION=="add",  SUBSYSTEMS=="${UDEV_SUBSYSTEMS}", KERNEL=="${UDEV_KERNEL}", ATTRS{serial}=="${ATTRS_SERIAL}", NAME="${NAME_OF_DEVICE}", SYMLINK:="disk/${NAME_OF_DEVICE}", GROUP="users", MODE="660", RUN+="/root/bin/udev_mount.sh $env{ACTION} '${NAME_OF_DEVICE}' &"
ACTION=="remove", ENV{PRODUCT}=="${ENV_PRODUCT}", RUN+="/root/bin/udev_mount.sh $env{ACTION} '${NAME_OF_DEVICE}' &", OPTIONS=="ignore_remove"
EOF

echo "#-----------------------------------------"
echo "# fstab"
echo "#-----------------------------------------"
cat - <<EOF
# added by `pwd`/$0
# External ${UDEV_SUBSYSTEMS} device - ${NAME_OF_DEVICE}
/dev/disk/${NAME_OF_DEVICE}  ${FSTAB_MOUNT_DIR}/${NAME_OF_DEVICE}  ${FSTAB_FILESYSTEM} ${FSTAB_MOUNT_OPTS} ${FSTAB_BOOT_OPTS}
EOF

echo "#-----------------------------------------"
echo "# exports"
echo "#-----------------------------------------"
# source CLIENTLIST if exit
if test -e /root/bin/nfs_clientlist.sh
then
 . /root/bin/nfs_clientlist.sh
fi

NFS_STRING=${FSTAB_MOUNT_DIR}/${NAME_OF_DEVICE}

for client in $CLIENTLIST
do
       NFS_STRING="${NFS_STRING} ${client}(${NFS_OPTIONS})"
done

# write the file
cat - <<EOF
# added by `pwd`/$0
# External ${UDEV_SUBSYSTEMS} device - ${NAME_OF_DEVICE}
${NFS_STRING}
EOF

What remains now is to add the device into the fstab on the attached nfs client.

On client: Write the essential mount / umount script

Two scripts will trigger the mount/umount on each client.

It is called with the parameter [mount|umount]. The callers are e.g. an init script, udev or it will be called manually on login/logout actions or whatever you can expect. We will see this later.

For now let's write the first script down. It is just a wrapper for calling the real worker, that is doing the mount/umount work on each client:

cd /root/bin
vim mount_nfs_exports_on_attached_clients

#!/bin/bash
#
# /root/bin/mount_nfs_exports_on_attached_clients.

# Umount/mount all exported nfs mount on attached clients.
# Do an appropriate fstab entry on these clients.
#
# The used mount directories AND client names MUST 
# match the udev and fstab entries 
# on thes machines - which should be the same - exactly.

export HOME=/root
export USER=root
export PATH=/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/opt/gnome/bin
. /root/bin/nfs_clientlist.sh

# Info  (-t) for logger
ME="mount_nfs"

# check the command line parameter
MOUNT="$1"
if [[ ${MOUNT} =~ [mount|umount] ]] 
then
logger -t $ME "STARTING:   $THISHOST"
logger -t $ME "CLIENTLIST: $CLIENTLIST"
else
   logger -t $ME "ERROR: only mount or umount as parameter are allowed." \
   exit 1
fi

# force remount on network CLIENTLIST
for client in $CLIENTLIST
do
    /bin/bash /root/bin/mount_nfs_on_client ${MOUNT} ${client} &
done

The second script does the work on each client:

vim mount_nfs_on_client

#!/bin/bash
#
# /root/bin/mount_nfs_on_client

# Umount/mount all exported nfs mounts on the attached clients.
# Do an appropriate fstab entry on these clients.
#
# The used mount directories AND client names MUST 
# match the udev and fstab entries 
# on thes machines - which should be the same - exactly.

export HOME=/root
export USER=root
export PATH=/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/opt/gnome/bin
. /root/bin/nfs_clientlist.sh

# Next line grabs all nfs exports
# We have to take care for the mount order.
# "sort" is doing that for us.
EXPORTS=""
EXPORTS_MOUNT="$(cat /etc/exports | grep -v ^# | grep " " | \
   cut -f 1 | sort | awk '{system("echo -n " $1 "----")}' | \
   sed s/----/"  "/g)"
EXPORTS_UMOUNT="$(cat /etc/exports | grep -v ^# | grep " " | \
   cut -f 1 | sort | sort -r | awk '{system("echo -n " $1 "----")}' | \
   sed s/----/"  "/g)"

# Info  (-t) for logger
ME="mount_nfs_client"

# check the command line parameter
MOUNT="$1"
if [[ ${MOUNT} ]] 
then
logger -t $ME "STARTING:   $THISHOST"
else
   logger -t $ME "ERROR: mount parmam not defined." \
   exit 1
fi

CLIENT="$2"
if [[ ${CLIENT} ]]
then
   logger -t $ME "CLIENT:     $CLIENT"
else
   logger -t $ME "ERROR: a client has to be attached." \
   exit 1
fi

# Manage exports
if [ "${MOUNT}" = "mount" ]
then
 EXPORTS=" $EXPORTS_MOUNT "
else
 EXPORTS=" $EXPORTS_UMOUNT "
fi

if [ "${MOUNT}" = "umount" ]
then
 EXPORTS=" $EXPORTS_UMOUNT "
fi

logger -t $ME "EXPORTS:    $EXPORTS"

# force remount on network CLIENT
if ping -c2 $CLIENT >> /dev/null
then
 
 for export in $EXPORTS
 do

  if [ "${MOUNT}" = "mount" ]
  then

    logger -t $ME "Trying mount..."
    
    # Check, if subdirectories exist (nfs can also mount subdirs!)
    if test -d "${export}"
    then

      logger -t $ME "Trying mount _${export}_ on _${CLIENT}_..."
      
      # For removable devices check, if they are 
      # not already mounted on the client
      su udevmount -c "/usr/bin/ssh udevmount@${CLIENT} \
      '/bin/mount | cut -d \" \" -f1 | grep -x ${THISHOST}:${export} \
       || sudo /bin/mount ${THISHOST}:${export} \
       && echo ${THISHOST}:${export} already mounted;'" \
       | logger -t $ME 

    fi
  fi
  
  if [ "${MOUNT}" = "umount" ]
  then

    logger -t $ME "Trying umount..."
    
    su udevmount -c "/usr/bin/ssh udevmount@${CLIENT} \
    'sudo /bin/umount ${THISHOST}:${export}'" \
    | logger -t $ME

  fi

 done

fi

Make the script executable by everyone but just editable by root:

chmod 755 mount_nfs_*
chmod root:root mount_nfs_*

On server: Call the script on boot

To trigger all attached clients of the system, you should call the script in your systems shutdown or boot scripts. On my ubuntu system this works like this:

/etc/init.d/rmnologin

E.g. call the script in the file /etc/init.d/rmnologin. It is the last script called on the system before the login prompt appears and therefore a good choice for every runlevel:

vim /etc/init.d/rmnologin

Add the line

# Mount nfs shares on connected pcs
/bin/bash /root/bin/mount_nfs_exports_on_attached_clients mount

Pay attention that you are calling the script with /bin/bash, the borne again shell and no other one. I encountered trouble e.g. with ubuntu's dash (symlinked to /bin/sh) bacause I am using some special bash features like [[ ]].
Pay attention to the parameter mount to call the script. This mounts all shares on this PC according to fstab.

/etc/rc.local

Running the script via /etc/rc.local didn't work for me, because network connections where not aware when running this script.

On server: Call the script on shutdown

Edit a shutdown runlevel script

Unfortunatly there is not runlevel script for shutdown on ubuntu.

So I devired the rc.local accordingly:

vim /etc/init.d/rc.shutdown

#! /bin/sh

PATH=/sbin:/bin:/usr/sbin:/usr/bin
[ -f /etc/default/rcS ] && . /etc/default/rcS
. /lib/lsb/init-functions

do_stop() {
       if [ -x /etc/rc.shutdown ]; then
               log_begin_msg "Running local shutdown scripts (/etc/rc.shutdown)"
               /etc/rc.shutdown
               log_end_msg $?
       fi
}

case "$1" in
   start)
       # DO nothing
       ;;
   restart|reload|force-reload)
       echo "Error: argument '$1' not supported" >&2
       exit 3
       ;;
   stop)
       do_stop
       ;;
   *)
       echo "Usage: $0 stop" >&2
       exit 3
       ;;
esac

Now edit the script file, which will be called from the above init script when shutdown occurs:

vim /etc/rc.shutdown

#!/bin/sh -e
#
# rc.local
#
# This script is executed when machine is shutting down or entering an runlevel 
# without network support.
#
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.

# Unmount nfs shares on attached clients
/bin/bash /root/bin/mount_nfs_exports_on_attached_clients umount

exit 0

Update the runlevels

And add it to the runlevels (debian way)

update-rc.d -f rc.shutdown defaults

A more restrictive way to do this is

update-rc.d rc.shutdown start 01 2 3 4 5 . stop 01 0 1 6 .

The last approach assures that the script starts before all others.

This works out of the box. If not see section troubleshooting at the end of this article.

You can try, if your script works with

/etc/init.d/rc.shutdown stop

On server: Call the script on desktop manager login/logout

Use gdm logout/login

My laptop is shutting down too fast, so the network connection is lost, before the nfs clients could be contacted. The problem also occurs, when using NetworkManager for network connections (e.g. wireless card).

You can then try to trigger the mount/umount script via the gnome login/logout scripts which you find in the following directories

# Run something ...

# ...before the desktop mangager session starts:
/etc/gdm/PreSession/Default

# ... after the login:
/etc/gdm/PostLogin/Default

# ... after the gnome session ends
# e.g. pressing the logout button
/etc/gdm/PostSession/Default

Put the following command at the beginning of these files and change use mount and umount for whatever is needed:

/bin/bash /root/bin/mount_nfs_exports_on_attached_clients mount
/bin/bash /root/bin/mount_nfs_exports_on_attached_clients umount

On server: Using udev to mount/umount drives

Purpose:

You want to share removable devices

If you don't use removable devices, like an USB backup drive or hot swappable drives, than you can skip the next paragraphs.

Therefore we have to consider additional prerequisites:

Editing special udev rules for the actions add/remove
Unique naming conventions for udev-rules and fstab

Udev Rule for an external USB drive

The udev rule we intend to write has to take care of

Giving the device to be mounted a unique name
Triggering our mount_nfs_shares... script according to a remove or adding of the device
Rejecting a buggy udev behaviour, that unpredictably fires on remove actions

The following udev rule suffices this:

vim /etc/udev/rules.d/10-local.rules

Unfortunately there is no variable handling in udev rules. So we have to specify the name of our device two or three times. This name must exactly match the entry in the /etc/fstab !!! Use the script I provided earlier in this article to produce convenient templates (section Create the fstab, exports, udev entries):

# LOCAL UDEV-RULES
#
# You can get infos about devices with
#
#   e.g. udevinfo  -a -p $(udevinfo -q path -n /dev/sda)
#        udevmonitor --env | grep PRODUCT

# External USB 3,5 MySpecialHarddisk
ACTION=="add",   SUBSYSTEMS=="usb", KERNEL=="sd?1", \
ATTRS{serial}=="200501CAF55", NAME="MySpecialHarddisk", \
SYMLINK:="disk/MySpecialHarddisk", GROUP="users", MODE="660", \
RUN+="/bin/bash /root/bin/nfs_udev_mount.sh $env{ACTION} 'MySpecialHarddisk' &"

ACTION=="remove", ENV{PRODUCT}=="67b/3507/1", \
RUN+="/bin/bash /root/bin/nfs_udev_mount.sh $env{ACTION} 'MySpecialHarddisk' &", \
OPTIONS=="ignore_remove"

Problems with ACTION remove

The add action was no problem. On remove action however, the ATTRS{} key for the device is not avaiable anymore, when the device was removed. As an effect, the remove action of the udev rule is never called.

It took me over a year to figure a trick out, to handle this problem: instead of ATTRS{} use the product id of the device, which will be available all the time.

With

udevmonitor --env | grep PRODUCT

you will get the PRODUCT_ID that matches the disconnected device. I is used with "ENV{PRODUCT}" in the udev rule.

Reload the rules

 udevcontrol reload_rules

Write the mount / umount script

As you can see, this latter udev rule triggers a script called nfs_udev_mount.sh. It is responsible for

mount/umount local devices
mount/umount shares on remote clients

Since until now (August 2007) udev/hal fires unpredictable on removing a device, I blocked the call of the script for 15 seconds (alter BLOCK_FOR_SECONDS to change this behavior). This should be enough on any system but is not a save solution for the problem. I hope further versions of udev/hal will fix this.

This script takes two parameters, that are triggerd with the udev rule:

the action that occurs: remove->umount, add->mount
the name of the device: mount/umount according to /etc/fstab

#!/bin/bash
#
# /root/bin/nfs_udev_mount.sh

# mount tevion according to /etc/udev/rules.d/10-local.rules
# Do an appropriate fstab entry, so mount -a
# will do the rest

export HOME=/root
export USER=root
export PATH="$PATH:/usr/local/bin:/sbin/:/usr/bin:/usr/sbin/:/usr/X11R6/bin:/bin:/opt/gnome/bin"

ACTION=$1
NAME=$2
ME=udev_nfs_mount
LOCKFILE=/tmp/udev_mount.lock
TIMESTAMP=`cat $LOCKFILE`
myTime=`date +%s`
BLOCK_FOR_SECONDS=15

MOUNT_DIR=/media
MOUNTPOINT=${MOUNT_DIR}/${NAME}
NFS_MOUNT_SCRIPT=/root/bin/mount_nfs_exports_on_attached_clients

# Troubleshooting of fireing hal - udev events
test -f $LOCKFILE || echo $myTime > $LOCKFILE
if [ $myTime -lt $TIMESTAMP ]
then
  #logger -t udev_mount.sh "exiting ..."
  exit 1
else
  #logger -t udev_mount.sh "setting new timestamp ..."
  expr $myTime + $BLOCK_FOR_SECONDS > $LOCKFILE
fi


###################################################
# NOW LETS go

logger -t $ME "${NAME} ${ACTION} OK" 

# --------------------------------------------------
# mount local devices
if [ "$ACTION" == "add" ]
then
 if mount | grep ${MOUNTPOINT}
 then
  echo already mounted ...
 else
  mkdir -p ${MOUNTPOINT}
  mount ${MOUNTPOINT}

  # force remount on network clients
  /bin/bash ${NFS_MOUNT_SCRIPT} mount

 fi
fi

if [ "$ACTION" == "remove" ]
then
  # force umount on network clients
  /bin/bash ${NFS_MOUNT_SCRIPT} umount

  #The following is a bad idea, cause udev handles this
  #umount -f /media/${NAME}

fi

logger -t $ME "$ACTION of $NAME finished."

For security reasons do

chmod 755 nfs_udev_mount.sh
chmod root:root nfs_udev_mount.sh

Test everything

If you now should add or remove a device on the server, and look what your clients are doing. Shutdown or reboot your nfs server, on all your clients should seamlessly appear/disappear the devices.

Open a terminal an watch: Do your shares appear?

watch -n2 df -h

What says syslog?

tail -f /var/log/syslog

What says udev?

udevmonitor --env

No desktop manager should hang anymore when shutting down your server or adding / removing your backup device ;)

Discussion

I know that some aspects of this implementation could cause problems.

Clientlist

There is just one nfs clientlist for each server. This issue might be solved, if I find the time to extract each client out of the exports file.

Time critical

The scripts are a little bit time critical. It assumes, that all clients/servers are running and the network connections are o.k. There are no further checks.

Each client is pinged two times before the ssh command will be executed. It takes a few seconds to mount / remount the devices, but it is done for each client in an a separate process.

Ping security risc

One is the fact, that ping is used to detect running clients. This might be a problem in secure networks, where ping is not enabled, or firewalls are blocking it.

But consider: waiting for an unsuccessful ssh command to response is more time consuming.

User udevmount security risc

Another is, that the udevmount user could be a security whole. The only way to decouple this, is to write a real wrapper or client/server application, that runs's as root and tunnels this aspect.

But consider

udevmount has no password, only ssh authenticated servers can connect. For install ssh authentication you need root access on the client/server
all scripts are possessed by root:root and can only be written by root:root

Not handy for big networks

For the system administrator it might be a little bit complicated to handle all the files, but with just one nfs server it boiles down to

Add a custom udev rule
Unify the fstab mountpoints and udev names for the devices
edit the nfs_clients.sh with clientlist and local hostname.

But a good system administrator can handle all this with a little bash magic ;)

Troubleshooting

System hangs nevertheless

Probably you disconnected the network. A permannt network connection is one of the prerequisites for a nfs network (see intro of this article).

First reconnect or restart the nfs server that causes the problem. Then wait a little bit - the lost share should reappear, the hung system work.

Then shutdown the system normally and your scripts should work.

Path

On some systems, your environment will not match the requirements.

Is your shell /bin/sh
Is your mount command in /bin/mount, same for umount

General

Open all this files in one editor on your nfs server as root:

gedit /etc/udev/rules.d/10-local.rules \
      /etc/fstab \
      /etc/exports \
      /etc/hosts \
      /root/bin/nfs_clientlist.sh \
      /root/bin/mount_nfs_exports_on_attached_clients \
      /root/bin/nfs_udev_mount.sh

On your nfs client open

gedit /etc/fstab

The mountpoints under /media, the device names for /etc/udev/rules.d/10-local.rules and /etc/fstab are unique
Are all nfs impors named correct in /etc/fstab according to the naming conventions on the server. Same unique device name, same mountpoint.
When you are using more than on network card (think about the wlan card on your laptop), check if you are using the correct IP/name mapping.

Alter the runlevels

Here another way for initialisation of the rc.shutdown script:

Remove the old links:

$ update-rc.d -f rc.shutdown remove
Removing any system startup links for /etc/init.d/rc.shutdown ...
  /etc/rc0.d/K20rc.shutdown
  /etc/rc1.d/K20rc.shutdown
  /etc/rc2.d/S20rc.shutdown
  /etc/rc3.d/S20rc.shutdown
  /etc/rc4.d/S20rc.shutdown
  /etc/rc5.d/S20rc.shutdown
  /etc/rc6.d/K20rc.shutdown

Add rc.shutdown to be started at first:

$ update-rc.d rc.shutdown start 01 2 3 4 5 . stop 01 0 1 6 .
Adding system startup for /etc/init.d/rc.shutdown ...
  /etc/rc0.d/K01rc.shutdown -> ../init.d/rc.shutdown
  /etc/rc1.d/K01rc.shutdown -> ../init.d/rc.shutdown
  /etc/rc6.d/K01rc.shutdown -> ../init.d/rc.shutdown
  /etc/rc2.d/S01rc.shutdown -> ../init.d/rc.shutdown
  /etc/rc3.d/S01rc.shutdown -> ../init.d/rc.shutdown
  /etc/rc4.d/S01rc.shutdown -> ../init.d/rc.shutdown
  /etc/rc5.d/S01rc.shutdown -> ../init.d/rc.shutdown

NFS - Automate attaching / detaching of shares

From Blue-IT.org Wiki

Revision as of 23:59, 26 August 2007 by WikiSysOp (talk | contribs) (→‎History)(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Contents

History

Prerequisites

Prerequisites

Motivation: add or removing shares

Solution: Publisher/Subscriber Pattern

Prepare your workstation / server

First open an editor

/etc/exports

Shares

On server: Create a clientlist

Trigger the remote mount/unmount of shares

Prepare the clients in the network

On client: Create an unpriviledged user with ssh

Prepare the server

On server: Export the ssh keys to each client

Back on prepared clients

On client: Remove the password of user udevmount

The mount / umount script

Naming conventions for mountpoints

Create the fstab, exports, udev entries

On client: Write the essential mount / umount script

On server: Call the script on boot

/etc/init.d/rmnologin

/etc/rc.local

On server: Call the script on shutdown

Edit a shutdown runlevel script

Update the runlevels

On server: Call the script on desktop manager login/logout

Use gdm logout/login

On server: Using udev to mount/umount drives

Udev Rule for an external USB drive

Problems with ACTION remove

Write the mount / umount script

Test everything

Discussion

Clientlist

Time critical

Ping security risc

User udevmount security risc

Not handy for big networks

Troubleshooting

System hangs nevertheless

Path

General

Alter the runlevels

Revision as of 23:59, 26 August 2007 by WikiSysOp (talk | contribs) (→‎History)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)