Difference between revisions of "Network Issues"

From Blue-IT.org Wiki

(iptraf-ng)
Line 114: Line 114:
  
 
== iptraf-ng ==
 
== iptraf-ng ==
 +
* [http://www.slashroot.in/linux-iptraf-and-iftop-monitor-and-analyse-network-traffic-and-bandwidth 03/2014 Linux iptraf and iftop: Monitor,Analyse Network Traffic and Bandwidth]
 +
* [http://www.slashroot.in/network-traffic-analysis-linux-tools 12/2012 Network Traffic Analysis With Linux Tools
 +
 
Ncurses-Interface:
 
Ncurses-Interface:
  
Line 134: Line 137:
 
                                 └─────────────────────────────────┘
 
                                 └─────────────────────────────────┘
 
   
 
   
   Displays current IP traffic information
+
   Displays current IP traffic information3
 
 
 
Interesting ar the IP checksum errors - which show possible hardware errors - in the detailed view:
 
Interesting ar the IP checksum errors - which show possible hardware errors - in the detailed view:
  

Revision as of 07:23, 1 May 2014

Links

* Network Lab (GER)


nmap

nmap -v -A ip_address

netstat

Show the name of the process using port 1812:

netatst -anp | grep 1812

Own internet ip

Fastest:

my_public_ip="$(dig @ns1.google.com -t txt o-o.myaddr.l.google.com +short | sed s/\"/\/g)"

Via curl an ipchicken or other:

curl -s http://www.ipchicken.com/ | awk '/[0-9]*\.[0-9]*\.[0-9]*\.[0-9]*/ {print $1}' | uniq

Own local ip


all ip's:

ifconfig | grep -Eo 'inet (addr:)?([0-9]*\.){3}[0-9]*' | grep -Eo '([0-9]*\.){3}[0-9]*' | grep -v '127.0.0.1'

or for a particualar interface:

ifconfig wlan0 | grep -Eo 'inet (addr:)?([0-9]*\.){3}[0-9]*' | grep -Eo '([0-9]*\.){3}[0-9]*' | grep -v '127.0.0.1'

or:

alias myip="ifconfig | sed -En 's/127.0.0.1//;s/.*inet (addr:)?(([0-9]*\.){3}[0-9]*).*/\2/p'"

Montitor ip changes

Network Manager

Status of all devices

export LC_MESSAGES="en_US@.UTF-8" \
export LC_TYPE="en_US.UTF-8" \
nmcli dev status


Testing network performance

There are a lot of possibilities to messure the network throughput on *nix machines. Some of the most valuable I am going to sumup in this article. Please read the corresponding links for further explanation at the end.

netperf

Installation:

sudo apt-get install netperf
sudo apt-get install ethstatus

Start netperf as a daemon (ubuntu / debian way)

sudo /etc/init.d/netperf start

Open a seperate terminal.

ethstatus -i eth0

Then start from the server...

netperf -H ip_of_client

...and vice versa on client

netperf -H ip_of_server

The last column will show the througput in (power of ten)-bits/sec (which has to be divided through 8 to get byte/sec)

netcat

First approach

From client machine to server ...

On server:

netcat -l -p 1234 > /dev/null

On client:

dd if=/dev/zero bs=1M count=1000 |netcat server 1234

From server to client machine ... On client:

netcat -l -p 1234 > /dev/null

On server:

dd if=/dev/zero bs=1M count=1000 |netcat client 1234

You can exchange /dev/zero with e.g. /dev/md0 (for a raid device) or /dev/sda for testing your harddisk performance.

Second approach

1st computer. (The Server)

nc -v -v -l -n -p 5096 >/dev/null

2nd computer. (The Client)

time yes|nc -v -v -n 192.168.1.1 5096 >/dev/null
Ctrl+C

On the server note the rcvd. Multiply by 8 and divide by the time you see on your client. This are the maximal (theoretical) MB/s speed you will get for file transfers over the network.


iperf

Messures the network perfomance.

On the server do (start iperf in server mode). -u für UDP.

iperf -s [-u]

On the client machine do

iperf -c server_ip [-u] -i 1 -t 10 # sends 10 Packets
iperf -c server_ip [-u] -b 1000M # sends 1Gig

Typical values

  • 15-25 Mbits/sec for a 54Mbit Wireless LAN
  • 300-350 Mbits/sec for a Gigabit LAN

The values depend heavily to

  • quality of the network card
  • quality of the cable (already CAT 6 !?) or wireless connection
  • bus speed
  • processor speed

iptraf-ng

* 03/2014 Linux iptraf and iftop: Monitor,Analyse Network Traffic and Bandwidth
* [http://www.slashroot.in/network-traffic-analysis-linux-tools 12/2012 Network Traffic Analysis With Linux Tools

Ncurses-Interface:

 iptraf-ng 1.1.4

                                ┌─────────────────────────────────┐
                                │ IP traffic monitor              │
                                │ General interface statistics    │
                                │ Detailed interface statistics   │
                                │ Statistical breakdowns...       │
                                │ LAN station monitor             │
                                │─────────────────────────────────│
                                │ Filters...                      │
                                │─────────────────────────────────│
                                │ Configure...                    │
                                │─────────────────────────────────│
                                │ About...                        │
                                │─────────────────────────────────│
                                │ Exit                            │
                                └─────────────────────────────────┘

 Displays current IP traffic information3

Interesting ar the IP checksum errors - which show possible hardware errors - in the detailed view:

 iptraf-ng 1.1.4
┌ Statistics for eth1 ────────────────────────────────────────────────────────
│
│               Total      Total    Incoming   Incoming    Outgoing   Outgoing
│             Packets      Bytes     Packets      Bytes     Packets      Bytes
│ Total:      1499246      4399M       91269    4911505     1407977      4394M
│ IPv4:       1498983      4399M       91093    4881798     1407890      4394M
│ IPv6:           263      37155         176      29326          87       7829
│ TCP:         126957      2345M       90591    4799078       36366      2341M
│ UDP:        1372093      2054M         528      78146     1371565      2053M
│ ICMP:           192      37152         147      33804          45       3348
│ Other IP:         4        128           3         96           1         32
│ Non-IP:           0          0           0          0           0          0
│
│
│ Total rates:          4.65 kbps            Broadcast packets:           44
│                          4 pps             Broadcast bytes:           8252
│
│ Incoming rates:       2.48 kbps
│                          1 pps
│                                            IP checksum errors:           0
│ Outgoing rates:       2.17 kbps
│                          2 pps
│
└ Elapsed time:   0:05 ───────────────────────────────────────────────────────

ethtool

Ethtool gives you important informations over your network card, its settings and actual modes:

ethtool eth0

sysctl

Settings for tpc ip settings:

for i in rmem wmem mem; do sysctl net.ipv4.tcp_${i}; done

gives e.g. on an older machine (366MHz AMD K6, 33MHz bus)

net.ipv4.tcp_rmem = 4096	87380	577600
net.ipv4.tcp_wmem = 4096	16384	577600
net.ipv4.tcp_mem = 13536	18050	27072

and on a "newer" system (AMD Athlon XP 2000+, 133MHz bus)

net.ipv4.tcp_rmem = 4096	87380	4194304
net.ipv4.tcp_wmem = 4096	16384	4194304
net.ipv4.tcp_mem = 170592	227456	341184

I can be set with e.g.:

sysctl -w net.ipv4.tcp_wmem="4096 16384 1048576"

But consider: better know what you are doing! On modern linux systems this should not be necessary.

MTU - Jumbo Frames

So called "Jumbo Frames" can reduce the CPU usage on the server. The network throughput is _NOT_ improved very much. Kernel greater than 2.6.17 support frame bigger than 1500 bythes.

Note, that both network card (driver) and used switches must support this kind of settings. Also it is not advisable to use this above large networks (internet connection might suffer). Better use this for direct connection between seperate NICs. Test e.g with

ifconfig eth0 mtu 9044; echo -- DO SOME TESTS NOW --; sleep 120; ifconfig eth0 mtu 16436

16436 is the default setting on actual systems. Other good values seem to be 4022

Network configuration files /etc/sysconfig/network-script/ifcfg-eth0 (CentOS / RHEL / Fedora Linux)

MTU=9044

Debian / Ubuntu Linux use /etc/network/interfaces configuration file.

mtu 9044

Test with

/etc/init.d/networking restart 
ip route get IP-address

Comparing with real (hard)drive performance

If you like to get the real disk perfance use e.g.

dd if=/dev/zero of=3_2-GIG-file bs=1M count=3096

or

dd if=/dev/sda of=/dev/null bs=1M
Ctrl + C

or read a file from a mounted directory

dd if=a_huge_file of=/dev/null bs=1M

or with hdparm (the buffered disk read is for interest!):

hdparm -tT /dev/disk

For realistic results you should also consider local disk read/writes for the operating system, other running tasks and that all components share the same (!) PCI bus. For that reason you have to sum up disk usage and network usage.

NFS performance

Mount options

For gigabit networks

rsize=32768,wsize=32768
rsize=65536,wsize=65536

See [5], [7]

Seperate NICs

If you like to use two seperate NICs on an extra private subnet, e.g. 10.0.0.0/24 (25.255.255.0) to communicate for NFS, you should disable the packet forwarding in /proc/sys/net/ipv4/ip_forward

sudo echo 0 >> /proc/sys/net/ipv4/ip_forward

Add the according NIC to your /etc/host

10.0.0.10   mynfsserver
10.0.0.1    mynfsclient1

TIP: You don't have to use a switch instead of a crossover cable connecting two PCs for Gigabit connection. There is merely no difference in performance. For gigabit (!) you don't even have to use a crossover cable because the standard supports using normal cables!

Links