Difference between revisions of "Postgres SQL"

From Blue-IT.org Wiki

(Automatically start postgres server)
(Add server to runlevel)
Line 185: Line 185:
 
If you like to access the server from other pc's add the port number ''5432'' (opensuse 10.1 & 10.2) or ''postgresql server'' to the allowed services. You can do this with YaST.
 
If you like to access the server from other pc's add the port number ''5432'' (opensuse 10.1 & 10.2) or ''postgresql server'' to the allowed services. You can do this with YaST.
  
==Add server to runlevel==
+
==Add server start to runlevel==
 
After the installation of ''postgresql-server'', it is not started automatically on boot.
 
After the installation of ''postgresql-server'', it is not started automatically on boot.
  

Revision as of 17:35, 11 November 2007

General

This guide is tested on ubuntu feisty with postgresql 8.2. It should work for former and future versions of both too.

General documentation you will find here:

You should read this in advance to make shure the concepts behind postgresql configuration, startup and security (e.g. 'roles).

User Management

General Dokumentation

Ubuntu Feisty, Gutsy

Installation

Install postgresql

sudo apt-get install postgresql-8.2 postgresql-client-8.2

For administration we install pgadmin3

sudo apt-get install pgadmin3 pgadmin3-data

Set database admin account

Alter the password for the standard postgres user account (as root)

sudo su
postgres -c psql template1

Inside the database:

template1=# ALTER USER postgres WITH PASSWORD 'new_password';
template1=# \q

Ubuntu Configuration files

/etc/postgresql/8.2/main/postgresql.conf

Assure that the server is accessible on localhost and from the servers ip.

sudo gedit /etc/postgresql/8.2/main/postgresql.conf
# - Connection Settings -
# what IP address(es) to listen on; 
# comma-separated list of addresses;
listen_addresses = 'localhost,server_ip'
password_encryption = on

/etc/postgresql/8.2/main/pg_hba.conf

Security and server settings. If you like to use the server in a network you have to pay attention to three points:

  1. Add the server ip to the listen adress
  2. Allow special clients to connect
  3. Think about using ssl, if you connect through the internet
sudo gedit /etc/postgresql/8.2/main/pg_hba.conf
# Allow any user on the local system to connect to any database under
# any user name using Unix-domain sockets (the default for local
# connections).
#
# Database administrative login by UNIX sockets
local all all trust

# TYPE DATABASE USER CIDR-ADDRESS METHOD

# "local" is for Unix domain socket connections only
local all all md5

# IPv4 local connections:
host all all 127.0.0.1/32 md5
# IPv6 local connections:
host all all ::1/128 md5

# Connections for all PCs on the subnet
#
# TYPE DATABASE USER IP-ADDRESS IP-MASK METHOD
# e.g. host all all 192.168.0.0/24 md5
# e.g. host all all 192.168.0.10 255.255.255.0 md5
host all all [ip address] [subnet mask] md5

Restart postgresql

sudo /etc/init.d/postgresql-8.2 restart

openSuSE 10.1, 10.3

SuSE oh SuSE ... why not just simply as debian, redhat & Co. ... !?

First I have to mention that it is almost impossible to get a howto on postgresql configuration on openSuSE. But what made me really angry was, that the sample files delivered with opensuse are completely useless to get a running system.

Finding an according howto for ubuntu was a matter of minutes. Not even a search at support database of SuSE or Novell's support database gave me ANY useful result. This is really poor. For an example see this thread.

One could draw the conclusion, that NOVELL(former SuSE)-users(!) have not much experience with postgresql databases, compared with debian. This is not very appeasing if you consider using this in a sensible environment with the default configuration.

I am sorry to say, but setting up postgresql on a debian/ubuntu system that supported postgres from its beginning might be a better choice not just for inexperienced users.

Installation of postgresql-server

This is easily done via yast or zypper

zypper install postgresql-server

Administration

Pgadmin III

Pgadmin is good for managing the database server after it is configured and running. The editing of the configuration files should be made by hand - doiing it with pgadmin is a little bit complicated.

  • Install prior to opensuse 10.3
    • via YaST and the guru repository
  • opensuse 10.3 repositories and later do not contain pgadmin any more

Lack of administration module

Later, when you log into the database, pgadmin complains about lacking the adminpack contrib module. I found no solution/reason for this until now --Apos 17:11, 11 November 2007 (CET)

There is a package postgresql-contrib that includes additional modules for the server.

Post Installation

Start the server for the first time:

rcpostgresql start

Login as user postgres and alter the table. Instead of using the template1 database like in ubuntu/debian

su postgres -c psql postgres
postgres=# ALTER USER postgres WITH PASSWORD 'postgres';
ALTER ROLE
postgres=# \q

openSuSE configuration files

Confusing:

  • all configuration files are owned by postgres:postgres and placed in
/var/lib/pgsql/share
  • all sample configuration files are owned by root:root and placed in
/usr/share/postgresql

Copy the /usr/share/postgresql/*.conf.sample files to /var/lib/pgsql/share/*.conf and alter their permissions/owner:

cd /var/lib/pgsql/share
cp /usr/share/postgresql/pg_hba.conf.sample pg_hba.conf
cp /usr/share/postgresql/postgresql.conf.sample postgresql.conf
chown postgres:postgres pg_hba.conf postgresql.conf
chmod 600 postgresql.conf pg_hba.conf postgresql.conf

/var/lib/pgsql/share/pg_hba.conf

I edited the pg_hba.conf (the security settings) according to a debian/ubuntu setup. Delete everything in the original file and usethis content:

vim pg_hba.conf
# TYPE  DATABASE        USER    IP-ADDRESS      IP-MASK         METHOD
local   all             all                                     trust

# Connections for PCs on the subnet. Add a line for each pc or network
# that want's to connect to the server.
# TYPE  DATABASE USER   IP-ADDRESS      IP-MASK         METHOD
#host   all     all     192.168.0.0/24                  trust
#host   all     all     192.168.0.100   255.255.255.255 trust
host    all     all     127.0.0.1       255.255.255.255 trust

Please alter the settings for accessing the database through other pc's of the network accordingly. The server 192.168.0.100 is just a sample! PostgreSQL on openSuSE is not configured for ident authentification method, like in on a debian system.

/var/lib/pgsql/share/postgresql.conf

For the postgres server settings file postgresql.conf alter the file according to the following settings. Don't forget to add you servers ip to the listen_adresses, if you like access your server from the outside.

vim postgresql.conf
[...]
# Next: ADD YOUR IP, comma separeted list ...
listen_addresses = 'localhost,192.168.0.1'
port = 5432
max_connections = 100
#ssl = on                    # SERVER DOES NOT START WITH 'ON'
password_encryption = on
shared_buffers = 24MB
log_destination = 'stderr'
redirect_stderr = on
#silent_mode = on            # Please UNCOMMENT !!!
log_line_prefix = '%t %d %u '

stats_row_level = on
autovacuum = on
default_transaction_read_only = off

datestyle = 'iso, dmy'
lc_messages = 'de_DE.UTF-8'
lc_monetary = 'de_DE.UTF-8'
lc_numeric = 'de_DE.UTF-8'
lc_time = 'de_DE.UTF-8'

Open the Firewall Port

If you like to access the server from other pc's add the port number 5432 (opensuse 10.1 & 10.2) or postgresql server to the allowed services. You can do this with YaST.

Add server start to runlevel

After the installation of postgresql-server, it is not started automatically on boot.

Open the runlevel editor in YaST. Choose expert mode and choose to run the server e.g. in the runlevels 2, 3 and 5.

Restart Server

rcpostgresql restart

Now you should be able to connect to the database via localhost and your IP adress (if added in the pg_hba.conf) via pgadmin.

Administration with Pgadmin III

Pgadmin helps you with almost all administration tasks to manage your postgresql databases. From managing user accounts (roles), creating tables, schemes, constraints (e.g. primary keys) to an extended sql editor.

Initial registration with pgAdminIII

To be able to manage your database with pgadmin you have to configure it for the specific server:

Working with pgAdminIII

Queries with pgadminIII

A very good tool for working with the database is the integrated sql query editor of pgadmin. Select the database you want to work with, then you can choose the query tool from the menu.

PostgreSQL queries are case sensitive. So if you specified Uppercase names for columns you have to use them exactly and in quotes. It might be necessary to add the schemata name postfixed by a dot to get a proper query:

select "Prename" from myscheme."Client";

Press <F5> to start the query.

You can easily save the queries in a file for later reuse.

Backup and restore with pgadminIII

PgadminIII makes it easy to backup your database with or without all the data. Just highlite the database you like to backup and choose the backup option from the main menu.

ODBC, Postgres and Openoffice

According to PostgreSQL-Datenbanken in OpenOffice.org 2.0 unter Linux.

Ubuntu Gutsy (7.10)

Openoffice <-> ODBC

For connection between openoffice and odebc:

apt-cache search odbc | grep unix
   unixodbc - ODBC tools libraries
   unixodbc-bin - Graphical tools for ODBC management and browsing

apt-get install unixodbc unixodbc-bin

With the command ODBCConfig you can manage the configuration files (part of the package unixodbc-bin). Start it as superuser with gksu or use it to manage your local database configuration files - stored in your home directory.

But for nowe, we will - later - edit the configuration files by ourself.

ODBC <-> Postgresql

For connection between the odbc layer and the database:

apt-cache search odbc
   odbc-postgresql - ODBC driver for PostgreSQL

apt-get install odbc-postgresql

Configuration files

Ubuntu installs its odbc libraries in /usr/lib/odbc. There are two versions of the postgres odbc driver: an ascii version (psqlodbca.so) and a unicode version (psqlodbcw.so). We are using the latter.

vim /etc/odbcinst.ini
[PostgreSQL]
Description = PostgreSQL ODBC Driver
Driver = /usr/lib/odbc/psqlodbcw.so
Setup = /usr/lib/odbc/libodbcpsqlS.so

For system wide database location you have to edit the /etc/odbc.ini file.

There is a section Driver. You have to insert exactly the same name as defined in the odbcinst.ini between the braces, e.g. use PostgreSQL, if your odbcinst.ini is defined as [PostgreSQL]:

vim /etc/odbc.ini
[pgTestDBSource]
Description = PostgreSQL Test Database
Driver = PostgreSQL
Servername = localhost
Database = pgtest
Port = 5432
ReadOnly = No

Establish connection

If you like to connect to an database via openoffice you should use a string like:

odbc://servername/databasename

Don't forget to allow connections in /etc/postgresql/8.2/main/pg_hba.conf (see above) to your database server!

The rest is really self explanatory within the openoffice database assistant ;)