Difference between revisions of "SVN"

From Blue-IT.org Wiki

(Second: set an password for the first user:)
(svn cleanup)
 
(22 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
== RabbitVCS ==
 +
 +
 +
== Ubuntu 12.04 ==
 +
 +
sudo add-apt-repository ppa:rabbitvcs/ppa
 +
sudo apt-get update && sudo apt-get install rabbitvcs-nautilus rabbitvcs-cli  rabbitvcs-gedit
 +
 +
== Ubuntu 13.10 ==
 +
PROBLEM, please read teh next, install testing ppa and nautilus3-version!
 +
* http://code.google.com/p/rabbitvcs/issues/detail?id=841
 +
 +
sudo add-apt-repository ppa:rabbitvcs/rabbitvcs-testing
 +
sudo apt-get update && sudo apt-get install rabbitvcs-nautilus rabbitvcs-nautilus3 rabbitvcs-cli rabbitvcs-gedit
 +
 
== SVN Integration with https ==
 
== SVN Integration with https ==
 +
This HowTo is tested with Debian 6 (squeeze) but should be applicable to any Linux based distribution.
 +
 
First of all your repository, e.g. /home/svn must be writable by the webserver:
 
First of all your repository, e.g. /home/svn must be writable by the webserver:
  
Line 10: Line 27:
  
 
  apt-get install libapache2-svn
 
  apt-get install libapache2-svn
  cd /etc/apache2/mods-available/
+
  a2enmod dav
  vim dav_svn.conf
+
  a2enmod dav_svn
 +
 
  
To access an svn like https://serverip/svn/repo1 (adn read/write access for user1) https://serverip/svn/repo2 (and read/write access for user2)  
+
To access an svn like https://serverip/svn/repo1 (with read/write access for user1) https://serverip/svn/repo2 (with read/write access for user2)  
 
  /path/to/
 
  /path/to/
 
       └── svn
 
       └── svn
Line 22: Line 40:
  
 
=== First: create a dav configuration file ===
 
=== First: create a dav configuration file ===
  vim /etc/apache2/dav_svn.passwd
+
 
 +
  cd /etc/apache2/mods-available/
 +
vim dav_svn.conf
  
 
  <nowiki><Location /svn></nowiki>
 
  <nowiki><Location /svn></nowiki>
Line 42: Line 62:
 
  <nowiki></Location></nowiki>
 
  <nowiki></Location></nowiki>
  
=== Second: set passwords for users: ===  
+
=== Second: set passwords for users: ===
 +
For the first user call htpasswd with the -c parameter (this _c_reates a new file and - of course - overwrites an existing one!):
  
 
  htpasswd -c /etc/apache2/dav_svn.passwd  user1
 
  htpasswd -c /etc/apache2/dav_svn.passwd  user1
Line 53: Line 74:
 
  vim /etc/apache2/dav_svn.authz
 
  vim /etc/apache2/dav_svn.authz
  
  ## Groups or users
+
  ## groups or users
 
  #groupname = user1,user2
 
  #groupname = user1,user2
 
   
 
   
 
  ## repositories
 
  ## repositories
 +
## the repositoryname is relative (!) to the given
 +
## repository in the dav_svn.conf file
 +
 
  #[reponame:/]
 
  #[reponame:/]
 
  ## read / write access for all users
 
  ## read / write access for all users
  #* = rw
+
  #* = rw  
 
  ## nor read acces for this group
 
  ## nor read acces for this group
  #@groupname =
+
  #@groupname =  
 
  ## read access for this user
 
  ## read access for this user
 
  #user1 = r
 
  #user1 = r
Line 114: Line 138:
  
 
  /etc/init.d/apache2 restart
 
  /etc/init.d/apache2 restart
 +
 +
= svn+ssh and https together =
 +
* Already running an ssh server?
 +
* Already have a user with ssh account (that's necessary)
 +
* BUT: this assumes that a users are in the subversion group and therefore have access to each other!!!
 +
* THAT'S WHY: for systems with greater user count use the https method!
 +
 +
Add the user you want to add to the subversion group:
 +
adduser username subversion
 +
(or later remove with: deluser username subversion)
 +
 +
Alter permissions of the repository "users_repository"
 +
chown /home/svn www-data:subversion
 +
chmod 770 /home/svn
 +
cd /home/svn
 +
chown -R www-data:subversion users_repository
 +
find users_repository/. -type d -name "*" -exec chmod -R g+rws {} \;
 +
find users_repository/. -type f -name "*" -exec chmod -R g+rw {} \;
 +
 +
That's it.
 +
 +
Now you can connect e.g.:
 +
svn checkout svn+ssh://username@SERVER_IP/home/svn/users_repository
 +
 +
Attention: In your checked out repository you have to switch the svn access url from http to svn+ssh!
 +
svn switch --relocate http://domain.com/{repo} svn+ssh://{username}@domain.com/home/{username}/svn/{repo}
  
 
= svnsync =
 
= svnsync =
Line 184: Line 234:
  
  
 +
== svn ppa ==
 +
Probably you are working in mixed environments.
 +
 +
The ubuntu svn repository always gives you access to the most actual subversion files:
 +
 +
* https://launchpad.net/~svn/+archive/ppa
 +
 +
== svn upgrade ==
 +
 +
Be careful with this an first make a backup of your working directory!
 +
 +
Sometimes it could be necessary to update an svn tree to use with a newer svn version. E.g. you have an archive of subversion 1.6, copied it over to your system whitch is running subserversion 1.7.
 +
 +
cd YOUR_PROJECTS_DIR
 +
find . -name .svn | awk '{system("cd " $0 "; cd .. ; svn upgrade")}'
 +
 +
== svn cleanup ==
 +
 +
find . -name .svn | awk '{system("cd " $0 "; cd .. ; svn cleanup")}'
 
[[Category:Project Management]]
 
[[Category:Project Management]]
 
[[Category:Version Control]]
 
[[Category:Version Control]]

Latest revision as of 08:00, 27 April 2014

RabbitVCS

Ubuntu 12.04

sudo add-apt-repository ppa:rabbitvcs/ppa
sudo apt-get update && sudo apt-get install rabbitvcs-nautilus rabbitvcs-cli  rabbitvcs-gedit

Ubuntu 13.10

PROBLEM, please read teh next, install testing ppa and nautilus3-version!

sudo add-apt-repository ppa:rabbitvcs/rabbitvcs-testing
sudo apt-get update && sudo apt-get install rabbitvcs-nautilus rabbitvcs-nautilus3 rabbitvcs-cli rabbitvcs-gedit

SVN Integration with https

This HowTo is tested with Debian 6 (squeeze) but should be applicable to any Linux based distribution.

First of all your repository, e.g. /home/svn must be writable by the webserver:

MYREPO="/home/svn"
chown -R www-data:www-data ${MYREPO}
find ${MYREPO} -type d -exec chmod 2755 \{} \;
find ${MYREPO} -not -type d -exec chmod 0644 \{} \;

Then you need mod_dav for apache2:

apt-get install libapache2-svn
a2enmod dav
a2enmod dav_svn


To access an svn like https://serverip/svn/repo1 (with read/write access for user1) https://serverip/svn/repo2 (with read/write access for user2)

/path/to/
      └── svn
           ├── repo1  -> should only be rw-accessible by user1
           └── repo2  -> should only be rw-accessible by user2

do the following 3 (4) steps:

First: create a dav configuration file

cd /etc/apache2/mods-available/
vim dav_svn.conf
<Location /svn>
    DAV svn
    SVNParentPath /path/to/svn
    AuthType Basic
    AuthName "Subversion Repository"
    AuthUserFile /etc/apache2/dav_svn.passwd
    AuthzSVNAccessFile /etc/apache2/dav_svn.authz
     
    # Allow access only with authentification
    Require valid-user
  
    # Allow acces with anonymous checkout
    #<LimitExcept GET PROPFIND OPTIONS REPORT>
    #  Require valid-user
    #</LimitExcept>
  
</Location>

Second: set passwords for users:

For the first user call htpasswd with the -c parameter (this _c_reates a new file and - of course - overwrites an existing one!):

htpasswd -c /etc/apache2/dav_svn.passwd  user1

and for every one after that without “-c“ (because this in case will overwrite the file!!!)

htpasswd /etc/apache2/dav_svn.passwd  user2

Third: create the authz file for authorization:

vim /etc/apache2/dav_svn.authz
## groups or users
#groupname = user1,user2

## repositories
## the repositoryname is relative (!) to the given
## repository in the dav_svn.conf file

#[reponame:/]
## read / write access for all users
#* = rw 
## nor read acces for this group
#@groupname = 
## read access for this user
#user1 = r

#[reponame:/trunk/]
## read / write access for user1 to /trunk/
#user1 = rw

[repo1:/]
user1 = rw

[repo2:/]
user2 = rw

Create a virtual host if you like:

SERVERIP="1.2.3.4"
MAIL="webmaster@mydomain.com"
DOMAIN="svn.example.com"
DOCPATH="/var/www"
SSLPATH="/var/webs/ssl"
CUSTOMER=""
CHAINFILE="/var/webs/ssl/CAcert_chain.pem"

cat << EOF > ${DOMAIN}.conf
<VirtualHost ${SERVERIP}:443>
  ServerAdmin webmaster@${DOMAIN}
  ServerName  www.${DOMAIN}
  ServerAlias ${DOMAIN}

  DocumentRoot ${DOCPATH}
  <Directory ${DOCPATH}>
    Options -MultiViews
    allow from all
  </Directory>
  # Possible values include: debug, info, notice, warn, error, crit,
  # alert, emerg.
  LogLevel warn

  CustomLog /var/log/apache2/access.log combined
  ErrorLog /var/log/apache2/error.log

  SSLEngine on
  SSLCertificateFile ${SSLPATH}/${CUSTOMER}/${DOMAIN}.cert
  SSLCertificateKeyFile ${SSLPATH}/${CUSTOMER}/${DOMAIN}.key
  SSLCertificateChainFile ${CHAINFILE}

</VirtualHost>
EOF

Restart Apache:

/etc/init.d/apache2 restart

svn+ssh and https together

  • Already running an ssh server?
  • Already have a user with ssh account (that's necessary)
  • BUT: this assumes that a users are in the subversion group and therefore have access to each other!!!
  • THAT'S WHY: for systems with greater user count use the https method!

Add the user you want to add to the subversion group:

adduser username subversion
(or later remove with: deluser username subversion)

Alter permissions of the repository "users_repository"

chown /home/svn www-data:subversion
chmod 770 /home/svn
cd /home/svn
chown -R www-data:subversion users_repository
find users_repository/. -type d -name "*" -exec chmod -R g+rws {} \;
find users_repository/. -type f -name "*" -exec chmod -R g+rw {} \;

That's it.

Now you can connect e.g.:

svn checkout svn+ssh://username@SERVER_IP/home/svn/users_repository

Attention: In your checked out repository you have to switch the svn access url from http to svn+ssh!

svn switch --relocate http://domain.com/{repo} svn+ssh://{username}@domain.com/home/{username}/svn/{repo}

svnsync

Taken from:

Create the following variables:

MYPATH="/home/svn"
URL_TO_REPO_ROOT_TO_CLONE="https://axelpospischil@ssl.qwws.net/svn/mt_roadrunner"
DEST_URL="/home/svn"

(Note: „DEST_URL“ is the url to the Subversion repository you create in step 1.)

1. Create your local repository:

svnadmin create ${MYPATH}

2. Create an empty pre-revprop-change hook script:

echo '#!/bin/bash' > ${MYPATH}/hooks/pre-revprop-change

3. Make the pre-revprop-change hook script executable:

chmod +x ${MYPATH}/hooks/pre-revprop-change

4. Initialize svnsync:

svnsync init file:⁄⁄⁄${MYPATH} ${URL_TO_REPO_ROOT_TO_CLONE}

5. Synchronize:

svnsync sync ${DEST_URL}

Subversion 1.6.x needs those added to the pre-revprop-change script:

    REPOS="$1"
    REV="$2"
    USER="$3"
    PROPNAME="$4"
    ACTION="$5"

Einrichten unter Debian

1. Svn installieren:

apt-get update
apt-get install subversion

2. Eine svn Gruppe erstellen und einen Benutzer hinzufügen:

groupadd subversion
addgroup username subversion

3. Ein svn Repository erzeugen oder ein Vorhandenes kopieren

mkdir /home/svn/myrepo
rsync -av oldserver:/home/svn /home/.
chown -R root:subversion /home/svn
svnadmin create --fs-type fsfs /home/svn/myrepo/projekt1
svnadmin create --fs-type fsfs /home/svn/myrepo/projekt2

4. Einloggen via ssh (geht nur, wenn ein ssh-Schlüssel im Userverzeichnis generiert wurde)

ssh+svn://servername/home/svn/myrepo


svn ppa

Probably you are working in mixed environments.

The ubuntu svn repository always gives you access to the most actual subversion files:

svn upgrade

Be careful with this an first make a backup of your working directory!

Sometimes it could be necessary to update an svn tree to use with a newer svn version. E.g. you have an archive of subversion 1.6, copied it over to your system whitch is running subserversion 1.7.

cd YOUR_PROJECTS_DIR
find . -name .svn | awk '{system("cd " $0 "; cd .. ; svn upgrade")}'

svn cleanup

find . -name .svn | awk '{system("cd " $0 "; cd .. ; svn cleanup")}'