Difference between revisions of "Thinkpad R31"

From Blue-IT.org Wiki

(xorg.conf)
(xorg.conf)
Line 60: Line 60:
  
 
==xorg.conf==
 
==xorg.conf==
 +
GLX and DRI works, but it is a little buggy and not very performant. Sometimes the system freezes on start. Then boot in safe mode and use the Option
 +
Option        "noaccel"  "true"
 +
for starting the xserver. Change it back, when X was up and restart X.
 +
 
  root@ibmr31:~# lsmod | grep agp
 
  root@ibmr31:~# lsmod | grep agp
 
  intel_agp              25620  1  
 
  intel_agp              25620  1  
Line 130: Line 134:
 
         Driver          "i810"
 
         Driver          "i810"
 
         #VideoRam      65536
 
         #VideoRam      65536
         #Option                 "DRI" "true"
+
         #Option         "DRI" "true"
        #Option               "noaccel"  "true" # use when X won't start
+
        # Change, when X won't start with BLACK SCREEN
 +
        #Option         "noaccel"  "true"  
 
         BusID          "PCI:0:2:0"
 
         BusID          "PCI:0:2:0"
 
  EndSection
 
  EndSection

Revision as of 16:05, 3 December 2007

General Info

This is a Thinkpad R31 2656-56G with 1024MB Ram (max) and a PIII M(obile) Intel Prozessor.

lspci

00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 04)
00:02.0 VGA compatible controller: Intel Corporation 82830 CGC [Chipset Graphics Controller] (rev 04)
00:02.1 Display controller: Intel Corporation 82830 CGC [Chipset Graphics Controller]
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB Controller #3 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02)
01:08.0 Ethernet controller: Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42)
01:09.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 02)
02:00.0 USB Controller: NEC Corporation USB (rev 43)
02:00.1 USB Controller: NEC Corporation USB (rev 43)
02:00.2 USB Controller: NEC Corporation USB 2.0 (rev 04)

Ubuntu Gutsy

/etc/network/interfaces

With support for tuntap, used by virtualbox.

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

auto eth0
iface eth0 inet manual

# The primary network interface
auto tap0
iface tap0 inet manual
 tunctl_user apos
 uml_proxy_arp ibmr31
 uml_proxy_ether eth0

# - install more if necessary
# - don't forget to add them to br0
# auto tap1
# iface tap1 inet manual
#  tunctl_user apos
#  uml_proxy_arp this_server
#  uml_proxy_ether eth0
   
# bridge
auto br0
iface br0 inet dhcp
 address 192.168.0.11
 netmask 255.255.255.0
 gateway 192.168.0.254
 bridge_ports eth0 tap0
 bridge_maxwait 0


xorg.conf

GLX and DRI works, but it is a little buggy and not very performant. Sometimes the system freezes on start. Then boot in safe mode and use the Option

Option         "noaccel"   "true"

for starting the xserver. Change it back, when X was up and restart X.

root@ibmr31:~# lsmod | grep agp
intel_agp              25620  1 
agpgart                35016  3 drm,intel_agp
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
       FontPath        "/usr/share/fonts/X11/misc"
       FontPath        "/usr/share/fonts/X11/cyrillic"
       FontPath        "/usr/share/fonts/X11/100dpi/:unscaled"
       FontPath        "/usr/share/fonts/X11/75dpi/:unscaled"
       FontPath        "/usr/share/fonts/X11/Type1"
       FontPath        "/usr/share/fonts/X11/100dpi"
       FontPath        "/usr/share/fonts/X11/75dpi"
       # path to defoma fonts
       FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
       Load    "i2c"
       Load    "bitmap"
       Load    "ddc"
       Load    "dri"
       Load    "extmod"
       Load    "freetype"
       Load    "glx"
       Load    "int10"
       Load    "vbe"
EndSection

Section "InputDevice"
       Identifier      "Generic Keyboard"
       Driver          "kbd"
       Option          "CoreKeyboard"
       Option          "XkbRules"      "xorg"
       Option          "XkbModel"      "pc105"
       Option          "XkbLayout"     "de"
       Option          "XkbOptions"    "lv3:ralt_switch"
EndSection

Section "InputDevice"
       Identifier      "Configured Mouse"
       Driver          "mouse"
       Option          "CorePointer"
       Option          "Device"                "/dev/input/mice"
       Option          "Protocol"              "ImPS/2"
       Option          "ZAxisMapping"          "4 5"
       Option          "Emulate3Buttons"       "true"
       Option          "EmulateWheel"          "true"
       Option          "EmulateWheelButton"    "2"
EndSection

Section "Device"
       Identifier      "Intel Corporation 82830 CGC [Chipset Graphics Controller]"
       Driver          "i810"
       #VideoRam       65536
       #Option         "DRI" "true"
       # Change, when X won't start with BLACK SCREEN
       #Option         "noaccel"   "true" 
       BusID           "PCI:0:2:0"
EndSection

Section "Monitor"
       Identifier      "Standardbildschirm"
       Option          "DPMS"
EndSection

Section "Screen"
       Identifier      "Default Screen"
       Device          "Intel Corporation 82830 CGC [Chipset Graphics Controller]"
       Monitor         "Standardbildschirm"
       DefaultDepth    16
       SubSection "Display"
               Depth           1
               Modes           "1024x768" "1024x600" "800x600" "768x576" "640x480"
       EndSubSection
       SubSection "Display"
               Depth           4
               Modes           "1024x768" "1024x600" "800x600" "768x576" "640x480"
       EndSubSection
       SubSection "Display"
               Depth           8
               Modes           "1024x768" "1024x600" "800x600" "768x576" "640x480"
       EndSubSection
       SubSection "Display"
               Depth           15
               Modes           "1024x768" "1024x600" "800x600" "768x576" "640x480"
       EndSubSection
       SubSection "Display"
               Depth           16
               Modes           "1024x768" "1024x600" "800x600" "768x576" "640x480"
       EndSubSection
       SubSection "Display"
               Depth           24
               Modes           "1024x768""1024x600" "800x600" "768x576" "640x480"
       EndSubSection
EndSection

Section "ServerLayout"
       Identifier      "Default Layout"
       Screen          "Default Screen"
       InputDevice     "Generic Keyboard"
       InputDevice     "Configured Mouse"
EndSection

Section "DRI"
       Mode    0666
EndSection