WinPC-NC

From Blue-IT.org Wiki

Revision as of 10:43, 31 December 2022 by Apos (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
  1. Trouble with WinPC-NC post prozessor of Fusion 360
    1. Using: https://cam.autodesk.com/hsmposts?p=winpc-nc

Gets weird circles for machining which exist _not_ in Fusion AMtmji8DFm.png

    1. Using HPGL is OK:

5Aq3SfWgVI.png

    1. Solution

"Multicam HPGL" post processor (version 43775) in Fusion 360 as Default

      1. Fusion

OHLM8pQ86v.png

      1. WinPC-NC
  • Z-Achses inverted
  • Coordinates left down (like in fusion!!!)

GkSaD0wDMr.png

      1. If Coordinates are wrong

Z25OzqCj4b.png

    1. Links