A word before we start

When I bought an eBook-Reader last chrismas (2011), an PocketBook Pro 912 with an open source linux operating system and firmware and an e-Ink Display.

By the way:

this article is based on the prerequisites of a reader with an e-Ink display
this article uses Linux (Ubuntu 11.10) and a lot of bash shell scripting

I didn't know, how much work it will cost myself to dive deep into the theme. The e-Ink-technology was what kept my interest. What I didn't know: this technology also needs a special way of reading your documents. It is not possible to simply throw a PDF to your device being sacrificed.

Years ago, when a began dealing with LaTeX - my preferred text processing method - I already had been aware of the problem that the information about the semantics of the given text, or the "metainformations" is low, if not exists at all any more. In technical term one would say, the entropy of a PDF-document is - compared to HTML, SGML, or XML, or even LaTeX - very low. This is, why PDF is only a media for printing but not a document format used by computer programs, thereby viewed on a screen or an e-reader.

Concrete:

you cannot alter the font size
a program cannot guess the text flow
on a reader with e-ink display, it might be impossible to read the document, because the fonts are to small

That's why you might want to convert your documents.

How do I like to do the E-Book-conversion:

unattended
batch-like
automatically
repeatedly
with open source software ;)

Let's have a look at the general work flow.

Most of what you read here I had found in the excellent mobile read forums - here about E-Book formats.

Test it

If you like to test you should have the following documents on your side:

Best a LaTeX or LyX document in a separate directory with
- titlepage
- table of content
- footnotes
- pictures and all that other fancy stuff ;)
Convert this document to HTML, RTF, PDF
Test all the conversion programs
Test your reader software, if it can show
- titlepage
- table of content
- footnotes
- pictures and all that other fancy stuff ;)

If you like, you can use this Lyx-file: File:Lyx whysiwym editor.zip. Be aware you need Lyx for this file to run.

The process

Reading plain PDF

There are mainly 3 points of interest, when it comes to read an PDF on an e-Ink device:

Keep all metainformation - like the table of content - after conversion
Cut as much of unnecessary space (title, white borders, ...)
Batch processing

Cropping the pages is the most sophisticated solution

Remember ... we are talking about e-Ink devices!

Briss

I had different approaches to cut the pages my PDFs, from the commercial acrobat writer, over imagemagick and other "crop"-tools. After all, and keeping the 3 points from above in mind the only tool I can recommend is briss.

Wrapper for the java program briss

Download and extract it somewhere. Written in java, and so that you can use it as any other program, you should write a little wrapper an put in in your path (e.g. ~/bin, /usr/local/bin, /usr/bin):

$> sudo youreditor /usr/local/bin/briss

#!/bin/bash
version="0.0.13"
cd "$(pwd)"
java -jar /whereever/is/installed/briss-${version}/briss-${version}.jar "${@}"

$> sudo chmod 755 /usr/local/bin/briss

Nautilus script for briss

Wouldn't it be nice to open a PDF or even a symbolic link in nautilus?

Her we go: put this file into

gedit "~/.gnome2/nautilus-scripts/Open with briss ..."

and make it executable

chmod "~/.gnome2/nautilus-scripts/Open with briss ..."

The following script works in most environments, but NOT with a sftp-mounted filesystem (see next script):

#!/bin/bash

cd "$NAUTILUS_SCRIPT_CURRENT_URI"

MYFILE="${1}"
MYBASENAME="$(basename ${MYFILE} .${MYTYPE})"

if file -L ${MYFILE} | grep -v grep | grep "PDF document" 
then
	briss ${MYFILE} 
else
	zenity --info --title "Error" --text "${MYFILE} seams not to be a file of type ${MYTYPE}. Please check."
	exit 0
fi

But if you are mounting the Pockebook like me via sftp, you will run into trouble. Nautilus scripts don't work in this environment (there scroll down to "Gnome-specific variables")!

What we have to do

Create an symbolic link so that your can access the mountpoint directly, e.g. with

ln -s ~/.gvfs ~/GVFS

When executing the script: warn the user, if an sftp mounted directory is detected and abort
When executing the script: set the propper path variable

And that's the way, it works, when you access your device via sftp and are within the ~/.gvfs-dir or a link to it:

#!/bin/bash
# version 0.0.1, 12-05-2012, Axel Pospischil, http://blue-it.org

MYTYPE="pdf"
MYFILE="${1}"

MYPATH="${NAUTILUS_SCRIPT_CURRENT_URI}"

if echo ${MYPATH} | grep -v grep | grep "^sftp:"
then
# SFTP (sftp://)
	zenity --error --title "Error" --text "${MYPATH}\n\nYou try to run this script within a directory mouted via sftp.\n\nThis will not work.\n\nPlease do a symbolic link with e.g. \n\nln -s ~/.gvfs ~GVFS\n\nThen access the device with this newly created link and - if you like - create a shortcut in nautilus!"
	exit 1
else
# Symbolic link (file:///)
	if echo ${MYPATH} | grep -v grep | grep "^file:"
	then
		MYPATH="$(echo "${NAUTILUS_SCRIPT_CURRENT_URI}" | sed -e 's/^file:\/\///g' | sed -e 's/\%20/ /g' )"
	else
# Standard (local dir)
		MYPATH="${NAUTILUS_SCRIPT_CURRENT_URI}"
	fi
fi


cd "${MYPATH}"

MYBASENAME="$(echo "${MYFILE}" | sed -e 's/\.pdf$//g' )"
[ "${MYBASENAME}" ] || exit 1

if file -L "${MYFILE}" | grep -v grep | grep "PDF document" 
then
	briss "${MYFILE}"

	FILESIZE=$(ls -l "${MYBASENAME}_cropped.${MYTYPE}" | awk '{ print $5 }')
	[ "${FILESIZE}" -eq 0 ] && rm -f "${MYBASENAME}_cropped.${MYTYPE}"

else
	zenity --info --title "Error" --text "${MYFILE} seams not to be a file of type ${MYTYPE}. Please check."
	exit 1
fi

Unattended batch conversion with briss

This way prepared, I wrote a batch conversion program. The main problem when writing a conversion script is, that many ebook titles contain chars like "[" or "&". This is something the bash does not like at all! Speaking shortly: I know this script has a lot of duplicate code in it. But believe me when I say: I tried more than once to change this.

The script (assumed you name it crop_with_briss.sh) mainly does the following:

General: all found PDF's are cropped and prefixed with "_cropped.pdf" (this is the default way briss works in batch mode "-s")
crop_with_briss.s myPDF.pdf: The given PDF will be automatically cropped to myPDF_cropped.pdf
crop_with_briss.s -l : Scan for all PDF-files in the local directory. Files which are formerly cropped (a file with the name *_cropped.pdf" exists, will not be cropped again!
crop_with_briss.s -lf : Scan for all PDF-files in the local directory. All (!!!) PDF's are cropped again.
crop_with_briss.s -r : Same as -l, but the script recurses into all (!) subdirectories.
crop_with_briss.s -rf : Same as -lf, but the script recurses into all (!) subdirectories.

So, here we go:

#!/bin/bash
# version 0.0.1, 12-03-2012, Axel Pospischil, http://blue-it.org
# version 0.0.2
#    - added parenthesis when doing filetype check for singe-mode: file "${1}" 

which briss > /dev/null || echo "Briss must be installed to run this script."
which briss > /dev/null || exit 0

[ "${1}" == "" ] && echo "Please specify -l (local path only) or -r (recursive) as parameter." && exit 1
MODE=""
FORCE="false"
[ "${1}" == "-r" ]  && MODE="recursive"
[ "${1}" == "-rf" ] && MODE="recursive"
[ "${1}" == "-rf" ] && FORCE="true"
[ "${1}" == "-l" ]  && MODE="local"
[ "${1}" == "-lf" ] && MODE="local"
[ "${1}" == "-lf" ] && FORCE="true"
file "${1}" | grep -v grep | grep "PDF document" && MODE="single"

if [ "${MODE}" == "single" ]
then
	cd $(pwd)
	briss -s "${1}"
	exit 1

fi

	
if [ "${MODE}" == "recursive" ]
then

if [ "${FORCE}" == "true" ]
then	
# First scan the local dir, then recursive
find '.' -name "*.pdf" | grep -v "cropped" | awk '{print $0}' | sed -e 's/^\.\///g' | sed -e 's/\.pdf$//g' | sed -e 's/(/\\(/g' | sed -e 's/)/\\)/g' | sed -e "s/'/\\\'/g" | sed -e 's/\[/\\[/g' | sed -e 's/\]/\\]/g' | sed -e 's/\&/\\&/g' | sed -e 's/\ /\\ /g' | awk '{system("briss -s " $0 ".pdf");}'
exit 1

else
find '.' -name "*.pdf" | grep -v "cropped" | awk '{print $0}' | sed -e 's/^\.\///g' | sed -e 's/\.pdf$//g' | sed -e 's/(/\\(/g' | sed -e 's/)/\\)/g' | sed -e "s/'/\\\'/g" | sed -e 's/\[/\\[/g' | sed -e 's/\]/\\]/g' | sed -e 's/\&/\\&/g' | sed -e 's/\ /\\ /g' | awk '{system("\[ -f " $0 "_cropped.pdf \] \|\| briss -s " $0 ".pdf");}'
exit 1

fi

fi

if [ "${MODE}" == "local" ]
then

if [ "${FORCE}" == "true" ]
then
ls -b *.pdf | grep -v "cropped" | awk '{print $0}' | sed -e 's/\.pdf$//g' | sed -e 's/(/\\(/g' | sed -e 's/)/\\)/g' | sed -e "s/'/\\\'/g" | sed -e 's/\[/\\[/g' | sed -e 's/\]/\\]/g' | sed -e 's/\&/\\&/g' | sed -e 's/\ /\\ /g' | awk '{system("briss -s " $0 ".pdf");}'
exit 1

else
ls -b *.pdf | grep -v "cropped" | awk '{print $0}' | sed -e 's/\.pdf$//g' | sed -e 's/(/\\(/g' | sed -e 's/)/\\)/g' | sed -e "s/'/\\\'/g" | sed -e 's/\[/\\[/g' | sed -e 's/\]/\\]/g' | sed -e 's/\&/\\&/g' | sed -e 's/\ /\\ /g' | awk '{system("\[ -f " $0 "_cropped.pdf \] \|\| briss -s " $0 ".pdf");}'
exit 1

fi

fi

Contrast enhancement

Briss is doing a very good job cropping the documents. And when it comes to the adobe reader, I think, the contrast of the files is much better after cropping with briss.

But e-Ink devices normally only can show 16 gray scale "colors". So it would be handy to convert a document to grayscale and thereby enhance the contrast ;)

The solutions:

convert the PDF with imagemagick ("convert" or "mogrify" are the corresponding commands)
use a reader software with the capability of enhance the gamma or contrast of the content

The problems:

imagemagick
1. does not preserve the metacontent of our PDF (table of content)
2. the document is not searchable any more, or a TTS is not working any more
3. the document becomes significantly bigger
4. the result on my PocketBook Pro 912 is not what I expected, when it comes to quality and contrast enhancement. The PDf's seam to be not that crispy, clear.
reader software
1. I did not find any software, that satisfied me
2. There is mainly one that can handle DJVUs: convert the pdf to djvu and use a fork of djviewer, it's called djviewer-bw and you will find it, when you search the http://www.mobileread.com forum. Mainly you should read and post in this thread. The modified software has 3 levels for viewing documents: black and white, grayscale and normal. You can choose this either my quickmenu or clicking in the upper left, bottom left or bottom right area of the reader.
3. Just for note: coolreader can not (!) display PDF files.

Do it with Imagemagick:

convert -density 600 -contrast -gamma 0.1 -colorspace GRAY input.pdf output.pdf

A word on djvu and rescanning of PDF

DJVU is a very good format for keeping your scanned documents. It is NOT a good format for reading text on an e-Ink device. It has the same disadvantages as PDF.

There are a lot of converters out there. Mainly

pdf2djvu (contained in any linux distribution). Keeps all the metainformation - including the table of content - of the pdf!
djvudigital, which uses ghostscript. Because there are licence issues, you have to compile it by yourself, which isn't very much fun.

In the part of contrast enhancement (see problem nr. 2.2) there is a link to a djviewer fork that has a contrast enhanced viewing mode (mainly black and white mode) for djvu files. But I could not see a big difference compared to a good cropped pdf. This depends heavily on the kind of pdf you have.

If you are interested, please read the corresponding webpages or the onlinemanuals ;)

From LaTeX to PDF or HTML

My LaTeX-documents can easily be altered to produce appropriate output for an e-Ink device.

But generating a PDF will be only suitable for a certain e-Ink device (when it comes to the font size). By the way: there is no direct possibility to create a ebub or mobi document from LaTex (as far as I know at the moment).

So my preferred output format is HTML! There is nothing more to say about.

The table of content is preserved
No problems with font-sizing
Easy conversion to other ebook formats (epub, mobi, ...)

Elyxer

I am using elyxer to convert my LaTeX files. I have to admit, that I am working - exclusively (!) - with LyX. So everything here (elyxer, scripts) is only suitable, if you are working with lyx. You can alter the scripts for usage with plain latex, there should not be any problem.

The next script converts all lyx-files, either locally ( -l ) or recursively ( -r ):

#!/bin/bash
[ ! -f /usr/bin/elyxer.py ] && echo "Elyxer must be installed to run this script." && exit 0

[ "${1}" == "" ] && echo "Please specify -l (local path only) or -r (recursive) as parameter." && exit 1

if [ "${1}" == "-r" ]
then
	for myfile in "$(find '.' -name "*.lyx" | awk '{print $0}' | sed -e 's/ /\\ /g' | sed -e 's/.lyx//g')"
	do 
        	echo "${myfile}" | awk '{system("elyxer.py " $0 ".lyx > " $0 ".html");}'
	done
fi

if [ "${1}" == "-l" ]
then
	for myfile in "$(ls *.lyx | awk '{print $0}' | sed -e 's/ /\\ /g' | sed -e 's/.lyx//g')"
	do 
        	echo "${myfile}" | awk '{system("elyxer.py " $0 ".lyx > " $0 ".html");}'
	done
fi

The same script for producing PDF-files using pdflatex ( lyx --export pdf2 ). You can easily adopt this:

#!/bin/bash

[ "${1}" == "" ] && echo "Please specify -l (local path only) or -r (recursive) as parameter." && exit 1

if [ "${1}" == "-r" ]
then
	for myfile in "$(find '.' -name "*.lyx" | awk '{print $0}' | sed -e 's/ /\\ /g')"
	do 
        	echo "${myfile}" | awk '{system("lyx --export pdf2 -f " $0);}'
	done
fi

if [ "${1}" == "-l" ]
then
	for myfile in "$(ls *.lyx | awk '{print $0}' | sed -e 's/ /\\ /g')"
	do 
        	echo "${myfile}" | awk '{system("lyx --export pdf2 -f " $0);}'
	done
fi

A word on MHT

There would be an ideal solution for archiving webpages in one single file: the mht-format. There are plugins for firefox to view these files.

Unfortuneately none of the existant readers of the Pocketbook is able to read mht-files. One excuse: the coolreader, but there are errors displaying complex files and also no "table of content".

Probably future software versions can handle this format.

Articles about using and creating mht files:

From PDF to epub, reflow and rescanning of PDF

Generally: no good idea, but possible. Why? The reason is simple: PDF has almost no met information about the document structure any more. So all tools more or less have to guess - of course a very clever guess - about the document structure, what is a heading, what is text, which kind of heading do we have, 2 or more column pages. What should I say: I leave it and read my PDf-Files - if they are too big for my screen - in landscape format. Any 10 device is capable to turn the pages 90° to the left or right so you can read the pages.

It doesn't matter, how you generate your epub out of an PDF or use a reflow software - either standalone or integrated in your reader: the more complex your PDF document is, the more disappointing the result will be. So better don't waste your time. There might be a time when these converters are that smart, that they can produce acceptable results out of complex documents, but my approach would be, to buy an appropriate format (like HTML or EPUB) before I run into this trouble!

The reflow software of the most readers out there seams to do a quiet good job. But there are some problems, when it comes to complex documents.

For those, who like to try it out:

pdfreflow (part of every Linux distribution)
soPDF at mobileread.com and the soPDF project page. A clever software, which does not extract the text, but cuts out the complete PDF-content and reassembles it. A really ood approach.
k2pdfopt from Mr. Willus
pdfr from the same author. Almost like k2pdfopt

From HTML to epub or mobi

One of the most sophisticated formats when it comes to eBooks is epub.

HTML is - from my point of view - the best starting point for conversion. As described above it can easily be created using LaTeX or even other word processors. There are a lot of tools out there converting from e.g. HTML. But almost none is capable of keeping the "table of content". And this is - when it comes to ereading - one of the most important part.

My prerequisites for a conversion tool

should be opensource
crossplatform (Windows, Linux, Mac, ...)
commandline batch processing
should preserve most of the text structure (table of content, footnotes, ...)

So here are the candidates:

The free tool kindlegen from amazon.
For private use free ist eCub, a simple version of the next tool
The shareware Jutoh, but for demonstration purposes you can test it.

Prepare the HTML

Before you are going on any further, you should be aware to work with a so called "well formed" html document. You can do this by using the software tidy:

tidy -m -asxhtml -utf8 <yourfile>.html

You also can use the free online software tidy service. But be aware, that sending confidential content to a web service might not be a good idea!

If you are under windows, this site might be from interest for you.

Kindlegen

Is crossplattform and does a very good job. I hav nothing to complain. It produces files in the "*.mobi"-format.

The only problem I have:

the "table of content" goes away!

eCub

Did not succeed the "table content" test, but was quiet handy. It is only free for private usage and has the same limitations like Jutoh. It seams to be a simpler version of that program.

For this and the next program and more complex documents it is important to edit the settings and add a correct css file. Why it is not possible to use the style links in the HTML document is a miracle for me.

Jutoh

This is not free software. But it is a full featured Editor for ebook generation.

Advantages:

Support of almost any ebook format
Fully WHYSIWYG editor

But I don't need the latter, because I want to edit my documents with the processor of my choice.

Disadvantages:

Project based. So you first have to import a document via GUI in a project file.
This is a GUI-tool, no commandline tool. But it has a batch mode, if you formerly created a project file.
Generation of the "table of content" will not allays succeed with my LaTeX documents.

Changelog

Section about MHT --Apos 21:44, 4 January 2012 (CET)
Nautilus-script for briss- --Apos 05:32, 5 January 2012 (CET)
Nautilus-script for briss whichprevent user from using sftp mounts - --Apos 15:59, 5 January 2012 (CET)
There was an error in #Contrast enhancement, sorry. The reader is not fbreader, but djvureader, link added

[

Ebook Conversion

From Blue-IT.org Wiki

Revision as of 17:23, 7 January 2012 by WikiSysOp (talk | contribs) (→‎A word before we start)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Contents

A word before we start

Test it

The process

Reading plain PDF

Cropping the pages is the most sophisticated solution

Briss

Wrapper for the java program briss

Nautilus script for briss

Unattended batch conversion with briss

Contrast enhancement

A word on djvu and rescanning of PDF

From LaTeX to PDF or HTML

Elyxer

A word on MHT

From PDF to epub, reflow and rescanning of PDF

From HTML to epub or mobi

Prepare the HTML

Kindlegen

eCub

Jutoh

Changelog

Ebook Conversion

From Blue-IT.org Wiki

Revision as of 17:23, 7 January 2012 by WikiSysOp (talk | contribs) (→‎A word before we start)(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Contents

A word before we start

Test it

The process

Reading plain PDF

Cropping the pages is the most sophisticated solution

Briss

Wrapper for the java program briss

Nautilus script for briss

Unattended batch conversion with briss

Contrast enhancement

A word on djvu and rescanning of PDF

From LaTeX to PDF or HTML

Elyxer

A word on MHT

From PDF to epub, reflow and rescanning of PDF

From HTML to epub or mobi

Prepare the HTML

Kindlegen

eCub

Jutoh

Changelog

Revision as of 17:23, 7 January 2012 by WikiSysOp (talk | contribs) (→‎A word before we start)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)